/*****************************************************
This program was produced by the
CodeWizardAVR V2.04.4a Advanced
Automatic Program Generator
© Copyright 1998-2009 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com

Project : 
Version : 
Date    : 14.06.2018
Author  : NeVaDa
Company : 
Comments: 


Chip type               : ATmega8L
Program type            : Application
AVR Core Clock frequency: 1,000000 MHz
Memory model            : Small
External RAM size       : 0
Data Stack size         : 256
*****************************************************/

#include <mega8.h>
#include <delay.h>
#include <stdio.h>
unsigned int l;
char buff[];  //буфер дисплея

#define LED PORTC.0
#include <fonts.c>

#include <SSD_SPI.c>

// Timer 0 overflow interrupt service routine
interrupt [TIM0_OVF] void timer0_ovf_isr(void)
{
// Place your code here

}

// Declare your global variables here

void main(void)
{
// Declare your local variables here

// Input/Output Ports initialization
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTB=0x00;
DDRB=0x00;

// Port C initialization
// Func6=In Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out 
// State6=T State5=0 State4=0 State3=0 State2=0 State1=0 State0=0 
PORTC=0x00;
DDRC=0x3F;

// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTD=0x00;
DDRD=0x00;

// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: 15,625 kHz
TCCR0=0x03;
TCNT0=0x00;

// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=FFFFh
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;

// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=FFh
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;

// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
MCUCR=0x00;

// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x01;

// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;

RESET_pin = 0;
CS_pin = 0;
RESET_pin = 1;
LCD_init();  LED = 1;
// Global enable interrupt
#asm("sei")

while (1)
      {

        LCD_Goto(0,1);
       sprintf(buff,"Привет мир SSD1306");
       LCD_Printf(buff,0);  //  вывод на дисплей, 0,1,2 - размер шрифта


       LCD_Goto(1,6);
       sprintf(buff,"123456789");
       LCD_Printf(buff,1);  //  вывод на дисплей

       LCD_Goto(0,7);
       sprintf(buff,"Строка 8");
       LCD_Printf(buff,0);  //  вывод на дисплей 


       

       

      };
}