Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 20000 -- 2 % complete Erasing 128 Kibyte @ 40000 -- 4 % complete Erasing 128 Kibyte @ 60000 -- 6 % complete Erasing 128 Kibyte @ 80000 -- 8 % complete Erasing 128 Kibyte @ a0000 -- 10 % complete Erasing 128 Kibyte @ c0000 -- 12 % complete Erasing 128 Kibyte @ e0000 -- 14 % complete Erasing 128 Kibyte @ 100000 -- 16 % complete Erasing 128 Kibyte @ 120000 -- 18 % complete Erasing 128 Kibyte @ 140000 -- 20 % complete Erasing 128 Kibyte @ 160000 -- 22 % complete Erasing 128 Kibyte @ 180000 -- 25 % complete Erasing 128 Kibyte @ 1a0000 -- 27 % complete Erasing 128 Kibyte @ 1c0000 -- 29 % complete Erasing 128 Kibyte @ 1e0000 -- 31 % complete Erasing 128 Kibyte @ 200000 -- 33 % complete Erasing 128 Kibyte @ 220000 -- 35 % complete Erasing 128 Kibyte @ 240000 -- 37 % complete Erasing 128 Kibyte @ 260000 -- 39 % complete Erasing 128 Kibyte @ 280000 -- 41 % complete Erasing 128 Kibyte @ 2a0000 -- 43 % complete Erasing 128 Kibyte @ 2c0000 -- 45 % complete Erasing 128 Kibyte @ 2e0000 -- 47 % complete Erasing 128 Kibyte @ 300000 -- 50 % complete Erasing 128 Kibyte @ 320000 -- 52 % complete Erasing 128 Kibyte @ 340000 -- 54 % complete Erasing 128 Kibyte @ 360000 -- 56 % complete Erasing 128 Kibyte @ 380000 -- 58 % complete Erasing 128 Kibyte @ 3a0000 -- 60 % complete Erasing 128 Kibyte @ 3c0000 -- 62 % complete Erasing 128 Kibyte @ 3e0000 -- 64 % complete Erasing 128 Kibyte @ 400000 -- 66 % complete Erasing 128 Kibyte @ 420000 -- 68 % complete Erasing 128 Kibyte @ 440000 -- 70 % complete Erasing 128 Kibyte @ 460000 -- 72 % complete Erasing 128 Kibyte @ 480000 -- 75 % complete Erasing 128 Kibyte @ 4a0000 -- 77 % complete Erasing 128 Kibyte @ 4c0000 -- 79 % complete Erasing 128 Kibyte @ 4e0000 -- 81 % complete Erasing 128 Kibyte @ 500000 -- 83 % complete Erasing 128 Kibyte @ 520000 -- 85 % complete Erasing 128 Kibyte @ 540000 -- 87 % complete Erasing 128 Kibyte @ 560000 -- 89 % complete Erasing 128 Kibyte @ 580000 -- 91 % complete Erasing 128 Kibyte @ 5a0000 -- 93 % complete Erasing 128 Kibyte @ 5c0000 -- 95 % complete Erasing 128 Kibyte @ 5e0000 -- 97 % complete Erasing 128 Kibyte @ 5e0000 -- 100 % complete Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 Writing data to block 3 at offset 0x60000 Writing data to block 4 at offset 0x80000 Writing data to block 5 at offset 0xa0000 Writing data to block 6 at offset 0xc0000 Writing data to block 7 at offset 0xe0000 Writing data to block 8 at offset 0x100000 Writing data to block 9 at offset 0x120000 Writing data to block 10 at offset 0x140000 Writing data to block 11 at offset 0x160000 Writing data to block 12 at offset 0x180000 Writing data to block 13 at offset 0x1a0000 Writing data to block 14 at offset 0x1c0000 Writing data to block 15 at offset 0x1e0000 Writing data to block 16 at offset 0x200000 Writing data to block 17 at offset 0x220000 Writing data to block 18 at offset 0x240000 Writing data to block 19 at offset 0x260000 Writing data to block 20 at offset 0x280000 Writing data to block 21 at offset 0x2a0000 [format_mtd()]:ending------------------------- [upgrade_kernel()]:ending------------------------- [upgrade_write_read_kernel()]:ending------------------------- [ SHELL INFO ]upgrade to the new rw_uImage endding !------------------- [upgrade_startup_picture()]:starting+++++++++++++++++++++++ -rw-r--r-- 1 root root 300.1K Jan 1 00:02 /usr/bin/sdg800/usr/usr/upgrade/logo.bin [format_mtd()]:starting+++++++++++++++++++++++ [ SHELL INFO ]write /usr/bin/sdg800/usr/usr/upgrade/logo.bin to Manufacturedata. Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 20000 -- 4 % complete Erasing 128 Kibyte @ 40000 -- 8 % complete Erasing 128 Kibyte @ 60000 -- 12 % complete Erasing 128 Kibyte @ 80000 -- 16 % complete Erasing 128 Kibyte @ a0000 -- 20 % complete Erasing 128 Kibyte @ c0000 -- 25 % complete Erasing 128 Kibyte @ e0000 -- 29 % complete Erasing 128 Kibyte @ 100000 -- 33 % complete Erasing 128 Kibyte @ 120000 -- 37 % complete Erasing 128 Kibyte @ 140000 -- 41 % complete Erasing 128 Kibyte @ 160000 -- 45 % complete Erasing 128 Kibyte @ 180000 -- 50 % complete Erasing 128 Kibyte @ 1a0000 -- 54 % complete Erasing 128 Kibyte @ 1c0000 -- 58 % complete Erasing 128 Kibyte @ 1e0000 -- 62 % complete Erasing 128 Kibyte @ 200000 -- 66 % complete Erasing 128 Kibyte @ 220000 -- 70 % complete Erasing 128 Kibyte @ 240000 -- 75 % complete Erasing 128 Kibyte @ 260000 -- 79 % complete Erasing 128 Kibyte @ 280000 -- 83 % complete Erasing 128 Kibyte @ 2a0000 -- 87 % complete Erasing 128 Kibyte @ 2c0000 -- 91 % complete Erasing 128 Kibyte @ 2e0000 -- 95 % complete Erasing 128 Kibyte @ 2e0000 -- 100 % complete Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 [format_mtd()]:ending------------------------- [upgrade_startup_picture()]:ending------------------------- cat /usr/bin/sdg800/usr/usr/upgrade/upgrade_info true +++++ process '-/bin/login' (pid 1034) exited. Scheduling for restart. starting pid 1195, tty '/dev/ttyO0': '-/bin/login' (none) login: [ 185.224762] musb-hdrc musb-hdrc.1: remove, state 1 [ 185.229801] usb usb1: USB disconnect, device number 1 [ 185.235110] usb 1-1: USB disconnect, device number 2 [ 185.250327] musb-hdrc musb-hdrc.1: USB bus 1 deregistered [ 185.256308] Restarting system. U-Boot SPL 2013.01.01-svn30622 (Jun 01 2017 - 12:13:09) config ddr_pll_config()++ config ddr_pll_config()-- nand_init+++++ nand_init----- Lcd_Init()++ SetUpLCD()++ SetUpLCD()-- len=307252, height=240, width=320 Logo from nandflash: base=0x81000000; end=0x8104b01f; end-base=0x4b01f; rwsize=0x4b020; r=0x0 Lcd_Init()-- U-Boot 2013.01.01-svn30622 (Jun 01 2017 - 12:13:09) I2C: ready DRAM: 128 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment set_default_env::8581 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: not set. Validating first E-fuse MAC PHY reset timed out cpsw Hit any key to stop autoboot mmc_send_cmd : timeout: No status update Card did not respond to voltage select! (Re)start USB... USB0: scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Download Linux from USB to Nandflash... reading ro_uImage ** Unable to read file ro_uImage ** reading rootfs.img ** Unable to read file rootfs.img ** reading firmdata0.img ** Unable to read file firmdata0.img ** reading datafs.img ** Unable to read file datafs.img ** reading logo.bmp ** Unable to read file logo.bmp ** Booting from nand ... NAND read: device 0 offset 0x3080000, size 0x300000 3145728 bytes read: OK ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-3.2.0-svn2240 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2875408 Bytes = 2.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Linux version 3.2.0-svn2240 (ding@ding-desktop) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #10 Thu May 25 16:25:00 ULAST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: am335xevm [ 0.000000] Ignoring tag cmdline (using the default kernel command line) [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=7,2048 rootfstype=ubifs rootwait=1t ip=none [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 123724k/123724k available, 7348k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc050d000 (5140 kB) [ 0.000000] .init : 0xc050d000 - 0xc0544000 ( 220 kB) [ 0.000000] .data : 0xc0544000 - 0xc05e7140 ( 653 kB) [ 0.000000] .bss : 0xc05e7164 - 0xc0609be4 ( 139 kB) [ 0.000000] NR_IRQS:396 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER2 at 25000000 Hz [ 0.000000] omap_dm_timer_switch_src: Switching to HW default clocksource(sys_clkin_ck) for timer1, this may impact timekeeping in low power state [ 0.000000] OMAP clocksource: GPTIMER1 at 25000000 Hz [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000178] Calibrating delay loop... 718.02 BogoMIPS (lpj=3590144) [ 0.057204] pid_max: default: 32768 minimum: 301 [ 0.057327] Security Framework initialized [ 0.057429] Mount-cache hash table entries: 512 [ 0.057791] CPU: Testing write buffer coherency: ok [ 0.077339] omap_hwmod: gfx: failed to hardreset [ 0.093383] omap_hwmod: pruss: failed to hardreset [ 0.094461] print_constraints: dummy: [ 0.094808] NET: Registered protocol family 16 [ 0.096905] OMAP GPIO hardware version 0.1 [ 0.099312] am335x_evm_init()------------ddr [ 0.099537] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.101725] am335x_evm_i2c_init()++ [ 0.101934] omap_i2c.1: alias fck already exists [ 0.102136] am335x_evm_i2c_init()-- [ 0.102888] omap2_mcspi.1: alias fck already exists [ 0.103102] omap2_mcspi.2: alias fck already exists [ 0.103364] edma.0: alias fck already exists [ 0.103385] edma.0: alias fck already exists [ 0.103404] edma.0: alias fck already exists [ 0.124690] bio: create slab at 0 [ 0.126712] SCSI subsystem initialized [ 0.128457] usbcore: registered new interface driver usbfs [ 0.128764] usbcore: registered new interface driver hub [ 0.128963] usbcore: registered new device driver usb [ 0.129112] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3 [ 0.129383] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1 [ 0.147272] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz [ 0.149116] tps65910 1-002d: JTAGREVNUM 0x0 [ 0.151493] print_constraints: VRTC: [ 0.152944] print_constraints: VIO: at 1500 mV [ 0.155240] print_constraints: VDD1: 600 <--> 1500 mV at 1262 mV normal [ 0.157528] print_constraints: VDD2: 600 <--> 1500 mV at 1137 mV normal [ 0.158522] print_constraints: VDD3: 5000 mV [ 0.159933] print_constraints: VDIG1: at 1800 mV [ 0.161346] print_constraints: VDIG2: at 1800 mV [ 0.162754] print_constraints: VPLL: at 1800 mV [ 0.164169] print_constraints: VDAC: at 1800 mV [ 0.165586] print_constraints: VAUX1: at 1800 mV [ 0.167006] print_constraints: VAUX2: at 3300 mV [ 0.168444] print_constraints: VAUX33: at 3300 mV [ 0.169857] print_constraints: VMMC: at 3300 mV [ 0.170341] tps65910 1-002d: No interrupt support, no core IRQ [ 0.171765] Switching to clocksource gp timer [ 0.187276] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.187448] musb-hdrc musb-hdrc.0: dma type: pio [ 0.188346] musb-hdrc musb-hdrc.0: USB OTG mode controller at c881c000 using PIO, IRQ 18 [ 0.188501] musb-hdrc musb-hdrc.1: dma type: pio [ 0.188894] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 0.188966] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 0.189096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.189112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.189126] usb usb1: Product: MUSB HDRC host driver [ 0.189137] usb usb1: Manufacturer: Linux 3.2.0-svn2240 musb-hcd [ 0.189149] usb usb1: SerialNumber: musb-hdrc.1 [ 0.189890] hub 1-0:1.0: USB hub found [ 0.189922] hub 1-0:1.0: 1 port detected [ 0.190436] musb-hdrc musb-hdrc.1: USB Host mode controller at c881e800 using PIO, IRQ 19 [ 0.190853] NET: Registered protocol family 2 [ 0.191048] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.191343] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.191431] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.191487] TCP: Hash tables configured (established 4096 bind 4096) [ 0.191499] TCP reno registered [ 0.191512] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.191536] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.191720] NET: Registered protocol family 1 [ 0.192045] RPC: Registered named UNIX socket transport module. [ 0.192060] RPC: Registered udp transport module. [ 0.192069] RPC: Registered tcp transport module. [ 0.192078] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.192325] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.199476] VFS: Disk quotas dquot_6.5.2 [ 0.199545] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.200032] msgmni has been set to 241 [ 0.200738] io scheduler noop registered [ 0.200751] io scheduler deadline registered [ 0.200812] io scheduler cfq registered (default) [ 0.201419] ti_cali_init()++ [ 0.201429] ti_cali_init()-- [ 0.201665] fpga_update_start_init()++ [ 0.202002] gpio_value = 0fpga_update_start_init()-- [ 0.202810] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0 [ 0.850381] console [ttyO0] enabled [ 0.854655] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1 [ 0.862490] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2 [ 0.870235] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3 [ 0.878009] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4 [ 0.885767] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5 [ 0.903129] brd: module loaded [ 0.911150] loop: module loaded [ 0.914558] at24 1-0051: 32768 byte 24c256 EEPROM, writable, 64 bytes/write [ 1.001812] No daughter card found [ 1.005403] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write [ 1.012674] am335x_evm_setup()++ [ 1.071814] AM335X: EVM Config read fail: -110 [ 1.076445] No board detected, using GPBoard 1.1A as default [ 1.082405] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 1.089349] The board is general purpose EVM in profile 0 [ 1.095011] Found invalid GP EVM revision, falling back to Rev1.1A [ 1.101650] _omap_mux_get_by_name: Could not find signal leds-gpio [ 1.108579] voltage_overload_protect_init()+++++++++++++++voltage_overload_protect_init()---------------------- [ 1.119370] da8xx_lcdc.0: alias fck already exists [ 1.125403] caliadc_probe()++ [ 1.128858] ts_dev->cali_base = f9e0d000 [ 1.133038] cali_idle_config()++ [ 1.136399] cali_idle_config()-- [ 1.139757] cali_step_config()++ [ 1.143131] STEPCONFIG1 = 0 [ 1.146036] cali_step_config()-- [ 1.149436] caliadc_probe()-- [ 1.152689] evm_nand_init()++ [ 1.155904] omap_nand_init()++ [ 1.159080] omap_nand_init()-- [ 1.162740] omap-gpmc omap-gpmc: GPMC revision 6.0 [ 1.167741] Registering NAND on CS0 [ 1.171986] evm_nand_init()-- [ 1.175239] _omap_mux_get_by_name: Could not find signal mcasp1_aclkx.mmc0_sdwp [ 1.183954] haptics_init()++ [ 1.187943] haptics_init()-- [ 1.191387] am335x_evm_setup()-- [ 1.196267] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.203542] omap2-nand driver initializing [ 1.208131] ONFI flash detected [ 1.211536] ONFI param page 0 valid [ 1.215206] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP) [ 1.223882] Creating 12 MTD partitions on "omap2-nand.0": [ 1.229540] 0x000000000000-0x000000020000 : "SPL" [ 1.235955] 0x000000020000-0x000000040000 : "SPL.backup1" [ 1.242930] 0x000000040000-0x000000060000 : "SPL.backup2" [ 1.249841] 0x000000060000-0x000000080000 : "SPL.backup3" [ 1.257083] 0x000000080000-0x000000260000 : "U-Boot" [ 1.264442] 0x000000260000-0x000000280000 : "U-Boot Env" [ 1.271359] 0x000000280000-0x000000580000 : "Manufacturedata" [ 1.279712] usb 1-1: New USB device found, idVendor=090c, idProduct=1000 [ 1.286736] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.294186] usb 1-1: Product: Flash Voyager [ 1.298543] usb 1-1: Manufacturer: Corsair [ 1.302820] usb 1-1: SerialNumber: A300000000026580 [ 1.308469] 0x000000580000-0x000003080000 : "rootfs" [ 1.333201] 0x000003080000-0x000003680000 : "kerneldata" [ 1.343240] 0x000003680000-0x000006880000 : "firmdata0" [ 1.370730] 0x000006880000-0x000009a80000 : "firmdata1" [ 1.398167] 0x000009a80000-0x000010000000 : "datafs" [ 1.446768] OneNAND driver initializing [ 1.451457] UBI: attaching mtd7 to ubi0 [ 1.455505] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 1.462045] UBI: logical eraseblock size: 126976 bytes [ 1.467669] UBI: smallest flash I/O unit: 2048 [ 1.472578] UBI: sub-page size: 512 [ 1.477386] UBI: VID header offset: 2048 (aligned 2048) [ 1.483652] UBI: data offset: 4096 [ 1.898558] UBI: max. sequence number: 263 [ 1.917845] UBI: attached mtd7 to ubi0 [ 1.921759] UBI: MTD device name: "rootfs" [ 1.927057] UBI: MTD device size: 43 MiB [ 1.932149] UBI: number of good PEBs: 344 [ 1.936956] UBI: number of bad PEBs: 0 [ 1.941581] UBI: number of corrupted PEBs: 0 [ 1.946217] UBI: max. allowed volumes: 128 [ 1.951024] UBI: wear-leveling threshold: 4096 [ 1.955931] UBI: number of internal volumes: 1 [ 1.960556] UBI: number of user volumes: 1 [ 1.965192] UBI: available PEBs: 0 [ 1.969818] UBI: total number of reserved PEBs: 344 [ 1.974907] UBI: number of PEBs reserved for bad PEB handling: 9 [ 1.981163] UBI: max/mean erase counter: 3/1 [ 1.985618] UBI: image sequence number: 1110853459 [ 1.990838] UBI: background thread "ubi_bgt0d" started, PID 554 [ 1.997422] Could not set LED4 to fully on [ 2.002857] da8xx_lcdc da8xx_lcdc.0: GLCD: Found HANSTAR_HSD070IDW1_A panel [ 2.100856] Logo image from nandflash, color_addr=[0xc88cb034], color_len=[0x4b000]! [ 2.116010] spidev_probe()++ [ 2.119267] spidev_probe()-- [ 2.122339] spidev_probe()++ [ 2.125564] spidev_probe()-- [ 2.129346] CAN device driver interface [ 2.133366] CAN bus driver for Bosch D_CAN controller 1.0 [ 2.181829] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6 [ 2.188287] davinci_mdio davinci_mdio.0: no live phy, scanning all [ 2.195050] davinci_mdio: probe of davinci_mdio.0 failed with error -5 [ 2.202219] usbcore: registered new interface driver zd1201 [ 2.208215] usbcore: registered new interface driver cdc_ether [ 2.214491] usbcore: registered new interface driver cdc_eem [ 2.220543] usbcore: registered new interface driver dm9601 [ 2.226420] cdc_ncm: 04-Aug-2011 [ 2.229948] usbcore: registered new interface driver cdc_ncm [ 2.235871] Initializing USB Mass Storage driver... [ 2.241232] scsi0 : usb-storage 1-1:1.0 [ 2.246183] usbcore: registered new interface driver usb-storage [ 2.252476] USB Mass Storage support registered. [ 2.257736] mousedev: PS/2 mouse device common for all mice [ 2.264221] input: matrix-keypad as /devices/platform/matrix-keypad/input/input0 [ 2.272768] Error: Driver 'tsc' is already registered, aborting... [ 2.279212] i2c /dev entries driver [ 2.283283] Linux video capture interface: v2.00 [ 2.288417] usbcore: registered new interface driver uvcvideo [ 2.294432] USB Video Class driver (1.1.1) [ 2.300729] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 2.309281] cpuidle: using governor ladder [ 2.314072] cpuidle: using governor menu [ 2.318165] oprofile: hardware counters not available [ 2.323443] oprofile: using timer interrupt. [ 2.327917] nf_conntrack version 0.5.0 (1933 buckets, 7732 max) [ 2.334534] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.340191] TCP cubic registered [ 2.343583] NET: Registered protocol family 17 [ 2.348223] can: controller area network core (rev 20090105 abi 8) [ 2.354764] NET: Registered protocol family 29 [ 2.359396] can: raw protocol (rev 20090105) [ 2.363859] can: broadcast manager protocol (rev 20090105 t) [ 2.369797] Registering the dns_resolver key type [ 2.374777] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.382786] ThumbEE CPU extension supported. [ 2.387297] mux: Failed to setup hwmod io irq -22 [ 2.392801] Power Management for AM33XX family [ 2.397612] Trying to load am335x-pm-firmware.bin (60 secs timeout) [ 2.404292] Copied the M3 firmware to UMEM [ 2.408576] omap_hwmod: wkup_m3: wkup_m3: hwmod data error: OMAP4 does not support st_shift [ 2.420550] clock: disabling unused clocks to save power [ 2.428101] Detected MACID=d0:ff:50:2:1e:5c [ 2.508331] UBIFS: recovery needed [ 2.659449] UBIFS: recovery completed [ 2.663412] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 2.669680] UBIFS: file system size: 40632320 bytes (39680 KiB, 38 MiB, 320 LEBs) [ 2.677677] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) [ 2.685327] UBIFS: media format: w4/r0 (latest is w4/r0) [ 2.691404] UBIFS: default compressor: lzo [ 2.695686] UBIFS: reserved for root: 0 bytes (0 KiB) [ 2.704063] VFS: Mounted root (ubifs filesystem) on device 0:13. [ 2.710663] Freeing init memory: 220K init started: BusyBox v1.13.2 (2012-04-08 17:28:57 CDT) starting pid 617, tty '': '/etc/init.d/rcS' rS in [ 3.253307] scsi 0:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS [ 3.307528] sd 0:0:0:0: [sda] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB) [ 3.321963] sd 0:0:0:0: [sda] Write Protect is off [ 3.331889] sd 0:0:0:0: [sda] No Caching mode page present [ 3.337618] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.365191] sd 0:0:0:0: [sda] No Caching mode page present [ 3.370927] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.435097] sda: [ 3.444900] sd 0:0:0:0: [sda] No Caching mode page present [ 3.450645] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.457046] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.679625] PHY 0:00 not found [ 3.682908] PHY 0:01 not found /etc/init.d/rcS: line 15: setterm: not found [ 3.716010] UBI error: ubi_io_read: error -74 (ECC error) while reading 160 bytes from PEB 126:5504, read 160 bytes ============================================================================================== ---------------------------------------------------------------------------------------------- Ei??°??A || 1.08.01.12R1 || svn://10.11.13.249/scope_sw/SDG1022/trunk/SDG800/src (SVN ID:27469) ---------------------------------------------------------------------------------------------- AU?E°?±? || 03.02.R02.04 || svn://10.11.13.250/SDG800/board-support/linux-3.2 (SVN ID:3161) ---------------------------------------------------------------------------------------------- UBOOT°?±? || 00-00-R00.00 || svn://10.11.13.249/scope_sw/uniform/uboot_sdk6.0 (SVN ID:25753) ---------------------------------------------------------------------------------------------- rootfs || svn://10.11.13.250/SDG800/board-support/ubi/rootfs_ubi (SVN ID:) || O?Ae°u:rootfs-ubi-sdg800-p12.tar.gz --------------[ 3.855465] UBI error: ubi_io_read: error -74 (ECC error) while reading 2026 bytes from PEB 127:80376, read 2026 bytes -------------------------------------------------------------------------------- datafs || svn://10.11.13.249/scope_sw/SDG1022/trunk/Numen/document/°?±?IA??/public/datafs_ubi(SVN ID:25859) || O?Ae°u:datafs-ubi-sdg800-p12.tar.gz -----------------------------------------------------------------------------------------[ 3.895437] UBI error: ubi_io_read: error -74 (ECC error) while reading 2637 bytes from PEB 127:66288, read 2637 bytes ----- firmdata0 || svn://10.11.13.249/scope_sw/SDG1022/trunk/Numen/document/°?±?IA??/public/firmdata0_ubi(SVN ID:25859) || O?Ae°u:firmdata0-ubi-sdg800-p12.tar.gz ---------------------------------------------------------------------------------------------- FPGA°?±? || sdg800_fpga_top_0x05_20150506.bin ---------------------------------------------------------------------------------------------- ??O? || Leon ---------------------------------------------------------------------------------------------- ·???EO?U || 2016-06-01 ---------------------------------------------------------------------------------------------- ???A?CA??? 1.?u?Aupdate.sh°?±?. ---------------------------------------------------------------------------------------------- ============================================================================================== starting pid 649, tty '/dev/ttyO0': '-/bin/login' (none) login: Current directory is g_current_dir=/usr/bin/sdg800 [check_and_upgrade()]:starting++++++++++++++++++++++++++++++++++++++++++++ [mount_fs()]: starting+++++++++++++++++ [ SHELL INFO ][Run command]:"mount_fs datafs, /usr/bin/sdg800/usr, ubi1_0, /usr/bin/sdg800/upgrade/datafs.img, rw" [ SHELL INFO ][is_ubi_fs_attached()]:UBI_INDEX="ubi1_0" unattached. return 0; [ SHELL INFO ]:get the mtd datafs index is MTD_NUM="11". [ SHELL INFO ][attach_ubi()]MTD_NAME=datafs [ SHELL INFO ][attach_ubi()]MTD_NUM=11 [ 4.222994] UBI: attaching mtd11 to ubi1 [ 4.227114] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 4.233667] UBI: logical eraseblock size: 126976 bytes [ 4.239294] UBI: smallest flash I/O unit: 2048 [ 4.244245] UBI: sub-page size: 512 [ 4.249057] UBI: VID header offset: 2048 (aligned 2048) [ 4.255328] UBI: data offset: 4096 [ 5.229195] UBI: max. sequence number: 473 [ 5.257727] UBI: attached mtd11 to ubi1 [ 5.261762] UBI: MTD device name: "datafs" [ 5.267078] UBI: MTD device size: 101 MiB [ 5.272259] UBI: number of good PEBs: 812 [ 5.277069] UBI: number of bad PEBs: 0 [ 5.281694] UBI: number of corrupted PEBs: 0 [ 5.286369] UBI: max. allowed volumes: 128 [ 5.291178] UBI: wear-leveling threshold: 4096 [ 5.296091] UBI: number of internal volumes: 1 [ 5.300718] UBI: number of user volumes: 1 [ 5.305354] UBI: available PEBs: 0 [ 5.309983] UBI: total number of reserved PEBs: 812 [ 5.315072] UBI: number of PEBs reserved for bad PEB handling: 24 [ 5.321422] UBI: max/mean erase counter: 2/1 [ 5.325882] UBI: image sequence number: 485451426 [ 5.330916] UBI: background thread "ubi_bgt1d" started, PID 670 UBI device number 1, total 812 LEBs (103104512 bytes, 98.3 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB) MOUNT_DIR_NAME = /usr/bin/sdg800/usr TEST_RESTURN = [ SHELL INFO ][is_fs_mounted()]return 0 --- TEST_RESTURN="". mount -o rw -t ubifs ubi1_0 /usr/bin/sdg800/usr [ 5.443991] UBIFS: recovery needed [ 5.547292] UBIFS: recovery completed [ 5.551226] UBIFS: mounted UBI device 1, volume 0, name "rootfs" [ 5.557525] UBIFS: file system size: 98152448 bytes (95852 KiB, 93 MiB, 773 LEBs) [ 5.565537] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs) [ 5.573170] UBIFS: media format: w4/r0 (latest is w4/r0) [ 5.579252] UBIFS: default compressor: lzo [ 5.583527] UBIFS: reserved for root: 0 bytes (0 KiB) [mount_fs()]: ending----------------------- [ SHELL INFO ]check_and_upgrade(): upgrade start ... [ SHELL INFO ]check_and_upgrade(): execute the new script "/usr/bin/sdg800/usr/usr/upgrade/siglentlib.sh". sh: /usr/bin/sdg800/usr/usr/upgrade/siglentlib.sh: Permission denied ========================================================== [upgrade_uboot()]:starting+++++++++++++++++++++++ arg=SPL -rw-r--r-- 1 root root 78.0K Jan 1 00:00 /usr/bin/sdg800/upgrade/MLO [format_mtd()]:starting+++++++++++++++++++++++ [ SHELL INFO ]write /usr/bin/sdg800/upgrade/MLO to SPL. Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 0 -- 100 % complete Writing data to block 0 at offset 0x0 [format_mtd()]:ending------------------------- arg=SPL.backup1 -rw-r--r-- 1 root root 78.0K Jan 1 00:00 /usr/bin/sdg800/upgrade/MLO [format_mtd()]:starting+++++++++++++++++++++++ [ SHELL INFO ]write /usr/bin/sdg800/upgrade/MLO to SPL.backup1. Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 0 -- 100 % complete Writing data to block 0 at offset 0x0 [format_mtd()]:ending------------------------- arg=SPL.backup2 -rw-r--r-- 1 root root 78.0K Jan 1 00:00 /usr/bin/sdg800/upgrade/MLO [format_mtd()]:starting+++++++++++++++++++++++ [ SHELL INFO ]write /usr/bin/sdg800/upgrade/MLO to SPL.backup2. Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 0 -- 100 % complete Writing data to block 0 at offset 0x0 [format_mtd()]:ending------------------------- arg=SPL.backup3 -rw-r--r-- 1 root root 78.0K Jan 1 00:00 /usr/bin/sdg800/upgrade/MLO [format_mtd()]:starting+++++++++++++++++++++++ [ SHELL INFO ]write /usr/bin/sdg800/upgrade/MLO to SPL.backup3. Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 0 -- 100 % complete Writing data to block 0 at offset 0x0 [format_mtd()]:ending------------------------- -rw-r--r-- 1 root root 366.0K Jan 1 00:00 /usr/bin/sdg800/upgrade/u-boot.img [format_mtd()]:starting+++++++++++++++++++++++ [ SHELL INFO ]write /usr/bin/sdg800/upgrade/u-boot.img to U-Boot. Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 20000 -- 6 % complete Erasing 128 Kibyte @ 40000 -- 13 % complete Erasing 128 Kibyte @ 60000 -- 20 % complete Erasing 128 Kibyte @ 80000 -- 26 % complete Erasing 128 Kibyte @ a0000 -- 33 % complete Erasing 128 Kibyte @ c0000 -- 40 % complete Erasing 128 Kibyte @ e0000 -- 46 % complete Erasing 128 Kibyte @ 100000 -- 53 % complete Erasing 128 Kibyte @ 120000 -- 60 % complete Erasing 128 Kibyte @ 140000 -- 66 % complete Erasing 128 Kibyte @ 160000 -- 73 % complete Erasing 128 Kibyte @ 180000 -- 80 % complete Erasing 128 Kibyte @ 1a0000 -- 86 % complete Erasing 128 Kibyte @ 1c0000 -- 93 % complete Erasing 128 Kibyte @ 1c0000 -- 100 % complete Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 [format_mtd()]:ending------------------------- [upgrade_uboot()]:ending------------------------- [upgrade_startup_picture()]:starting+++++++++++++++++++++++ -rw-r--r-- 1 root root 300.1K Jan 1 00:00 /usr/bin/sdg800/upgrade/logo.bin [format_mtd()]:starting+++++++++++++++++++++++ [ SHELL INFO ]write /usr/bin/sdg800/upgrade/logo.bin to Manufacturedata. Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 20000 -- 4 % complete Erasing 128 Kibyte @ 40000 -- 8 % complete Erasing 128 Kibyte @ 60000 -- 12 % complete Erasing 128 Kibyte @ 80000 -- 16 % complete Erasing 128 Kibyte @ a0000 -- 20 % complete Erasing 128 Kibyte @ c0000 -- 25 % complete Erasing 128 Kibyte @ e0000 -- 29 % complete Erasing 128 Kibyte @ 100000 -- 33 % complete Erasing 128 Kibyte @ 120000 -- 37 % complete Erasing 128 Kibyte @ 140000 -- 41 % complete Erasing 128 Kibyte @ 160000 -- 45 % complete Erasing 128 Kibyte @ 180000 -- 50 % complete Erasing 128 Kibyte @ 1a0000 -- 54 % complete Erasing 128 Kibyte @ 1c0000 -- 58 % complete Erasing 128 Kibyte @ 1e0000 -- 62 % complete Erasing 128 Kibyte @ 200000 -- 66 % complete Erasing 128 Kibyte @ 220000 -- 70 % complete Erasing 128 Kibyte @ 240000 -- 75 % complete Erasing 128 Kibyte @ 260000 -- 79 % complete Erasing 128 Kibyte @ 280000 -- 83 % complete Erasing 128 Kibyte @ 2a0000 -- 87 % complete Erasing 128 Kibyte @ 2c0000 -- 91 % complete Erasing 128 Kibyte @ 2e0000 -- 95 % complete Erasing 128 Kibyte @ 2e0000 -- 100 % complete Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 [format_mtd()]:ending------------------------- [upgrade_startup_picture()]:ending------------------------- [upgrade_write_read_kernel()]:starting+++++++++++++++++++++++ RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW [upgrade_kernel()]:starting+++++++++++++++++++++++ -rw-r--r-- 1 root root 2.7M Jan 1 00:00 /usr/bin/sdg800/upgrade/rw_uImage [ SHELL INFO ]The number of the mtd named "kernel" is "mtd8" [format_mtd()]:starting+++++++++++++++++++++++ [ SHELL INFO ]write /usr/bin/sdg800/upgrade/rw_uImage to kernel. Erasing 128 Kibyte @ 0 -- 0 % complete Erasing 128 Kibyte @ 20000 -- 2 % complete Erasing 128 Kibyte @ 40000 -- 4 % complete Erasing 128 Kibyte @ 60000 -- 6 % complete Erasing 128 Kibyte @ 80000 -- 8 % complete Erasing 128 Kibyte @ a0000 -- 10 % complete Erasing 128 Kibyte @ c0000 -- 12 % complete Erasing 128 Kibyte @ e0000 -- 14 % complete Erasing 128 Kibyte @ 100000 -- 16 % complete Erasing 128 Kibyte @ 120000 -- 18 % complete Erasing 128 Kibyte @ 140000 -- 20 % complete Erasing 128 Kibyte @ 160000 -- 22 % complete Erasing 128 Kibyte @ 180000 -- 25 % complete Erasing 128 Kibyte @ 1a0000 -- 27 % complete Erasing 128 Kibyte @ 1c0000 -- 29 % complete Erasing 128 Kibyte @ 1e0000 -- 31 % complete Erasing 128 Kibyte @ 200000 -- 33 % complete Erasing 128 Kibyte @ 220000 -- 35 % complete Erasing 128 Kibyte @ 240000 -- 37 % complete Erasing 128 Kibyte @ 260000 -- 39 % complete Erasing 128 Kibyte @ 280000 -- 41 % complete Erasing 128 Kibyte @ 2a0000 -- 43 % complete Erasing 128 Kibyte @ 2c0000 -- 45 % complete Erasing 128 Kibyte @ 2e0000 -- 47 % complete Erasing 128 Kibyte @ 300000 -- 50 % complete Erasing 128 Kibyte @ 320000 -- 52 % complete Erasing 128 Kibyte @ 340000 -- 54 % complete Erasing 128 Kibyte @ 360000 -- 56 % complete Erasing 128 Kibyte @ 380000 -- 58 % complete Erasing 128 Kibyte @ 3a0000 -- 60 % complete Erasing 128 Kibyte @ 3c0000 -- 62 % complete Erasing 128 Kibyte @ 3e0000 -- 64 % complete Erasing 128 Kibyte @ 400000 -- 66 % complete Erasing 128 Kibyte @ 420000 -- 68 % complete Erasing 128 Kibyte @ 440000 -- 70 % complete Erasing 128 Kibyte @ 460000 -- 72 % complete Erasing 128 Kibyte @ 480000 -- 75 % complete Erasing 128 Kibyte @ 4a0000 -- 77 % complete Erasing 128 Kibyte @ 4c0000 -- 79 % complete Erasing 128 Kibyte @ 4e0000 -- 81 % complete Erasing 128 Kibyte @ 500000 -- 83 % complete Erasing 128 Kibyte @ 520000 -- 85 % complete Erasing 128 Kibyte @ 540000 -- 87 % complete Erasing 128 Kibyte @ 560000 -- 89 % complete Erasing 128 Kibyte @ 580000 -- 91 % complete Erasing 128 Kibyte @ 5a0000 -- 93 % complete Erasing 128 Kibyte @ 5c0000 -- 95 % complete Erasing 128 Kibyte @ 5e0000 -- 97 % complete Erasing 128 Kibyte @ 5e0000 -- 100 % complete Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 Writing data to block 3 at offset 0x60000 Writing data to block 4 at offset 0x80000 Writing data to block 5 at offset 0xa0000 Writing data to block 6 at offset 0xc0000 Writing data to block 7 at offset 0xe0000 Writing data to block 8 at offset 0x100000 Writing data to block 9 at offset 0x120000 Writing data to block 10 at offset 0x140000 Writing data to block 11 at offset 0x160000 Writing data to block 12 at offset 0x180000 Writing data to block 13 at offset 0x1a0000 Writing data to block 14 at offset 0x1c0000 Writing data to block 15 at offset 0x1e0000 Writing data to block 16 at offset 0x200000 Writing data to block 17 at offset 0x220000 Writing data to block 18 at offset 0x240000 Writing data to block 19 at offset 0x260000 Writing data to block 20 at offset 0x280000 Writing data to block 21 at offset 0x2a0000 [format_mtd()]:ending------------------------- [upgrade_kerne[ 18.410510] UBI error: ubi_io_read: error -74 (ECC error) while reading 60 bytes from PEB 126:6536, read 60 bytes l()]:ending------------------------- [upgrade[ 18.426315] UBI error: ubi_io_read: error -74 (ECC error) while reading 60 bytes from PEB 126:11216, read 60 bytes _write_read_kernel()]:ending--------------------[ 18.441201] UBI error: ubi_io_read: error -74 (ECC error) while reading 65 bytes from PEB 126:10440, read 65 bytes ----- [upgrade_app()]:starting+++++++++++++++[ 18.456303] UBI error: ubi_io_read: error -74 (ECC error) while reading 67 bytes from PEB 126:15584, read 67 bytes ++++++++ [ 18.471229] UBI error: ubi_io_read: error -74 (ECC error) while reading 69 bytes from PEB 126:17144, read 69 bytes [ 18.485882] UBI error: ubi_io_read: error -74 (ECC error) while reading 70 bytes from PEB 126:7312, read 70 bytes [ 18.500535] UBI error: ubi_io_read: error -74 (ECC error) while reading 66 bytes from PEB 126:11600, read 66 bytes [ 18.515273] UBI error: ubi_io_read: error -74 (ECC error) while reading 65 bytes from PEB 126:9272, read 65 bytes [ 18.529830] UBI error: ubi_io_read: error -74 (ECC error) while reading 67 bytes from PEB 126:16752, read 67 bytes [ 18.544572] UBI error: ubi_io_read: error -74 (ECC error) while reading 63 bytes from PEB 126:10832, read 63 bytes [ 18.559294] UBI error: ubi_io_read: error -74 (ECC error) while reading 69 bytes from PEB 126:6144, read 69 bytes [ 18.573903] UBI error: ubi_io_read: error -74 (ECC error) while reading 68 bytes from PEB 126:9664, read 68 bytes [ 18.588536] UBI error: ubi_io_read: error -74 (ECC error) while reading 67 bytes from PEB 126:8096, read 67 bytes [ 18.603159] UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 126:10056, read 64 bytes [ 18.617899] UBI error: ubi_io_read: error -74 (ECC error) while reading 69 bytes from PEB 126:17536, read 69 bytes [ 18.632622] UBI error: ubi_io_read: error -74 (ECC error) while reading 63 bytes from PEB 126:15976, read 63 bytes [ 18.647272] UBI error: ubi_io_read: error -74 (ECC error) while reading 67 bytes from PEB 126:6920, read 67 bytes [ 18.665818] UBI error: ubi_io_read: error -74 (ECC error) while reading 70 bytes from PEB 126:16360, read 70 bytes [ 18.680539] UBI error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 126:18320, read 64 bytes [ 18.695279] UBI error: ubi_io_read: error -74 (ECC error) while reading 66 bytes from PEB 126:15192, read 66 bytes [ 18.709999] UBI error: ubi_io_read: error -74 (ECC error) while reading 70 bytes from PEB 126:8880, read 70 bytes [ 18.724577] UBI error: ubi_io_read: error -74 (ECC error) while reading 66 bytes from PEB 126:17928, read 66 bytes [upgrade_rootfs_missing_or_change_file()]:starting+++++++++++++++++++++++ [upgrade_hotplug()]:starting+++++++++++++++++++++++ [upgrade_hotplug()]:ending------------------------- [upgrade_start_script()]:starting+++++++++++++++++++++++ [upgrade_start_script()]:ending------------------------- [upgrade_password_login_files()]:starting+++++++++++++++++++++++ [upgrade_password_login_files()]:ending------------------------- [upgrade_version_info()]:starting+++++++++++++++++++++++ [upgrade_version_info()]:ending------------------------- [upgrade_rootfs_missing_or_change_file()]:ending------------------------- [upgrade_app()]:ending------------------------- [partition_firmdata0_from_datafs()]:starting+++++++++++++++++ [ SHELL INFO ][is_no_firmdata0_partition()]:firmdata0 is exist. return 0:partion 3.0 [ SHELL INFO ]:It is no need to make firmdata0 partition. [partition_firmdata0_from_datafs()]:ending----------------------- [write_no_need_to_upgrade_flag()]:+++++++++++++++++++ false [write_no_need_to_upgrade_flag()]:------------------- ========================================================== [ SHELL INFO ]:reboot for move old data files to MTD firmdata0! [check_and_upgrade()]:end--------------------------------- The system is going down NOW! [check_and_upgra[ 19.409896] UBI error: ubi_io_read: error -74 (ECC error) while reading 2156 bytes from PEB 127:36976, read 2156 bytes [ 19.421132] UBIFS error (pid 647): ubifs_leb_read: reading 2156 bytes from LEB 218:32880 failed, error -74 [ 19.431209] Backtrace: [ 19.433810] [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) [ 19.442618] r6:000000da r5:0000086c r4:ffffffb6 r3:c0565408 [ 19.448554] [] (dump_stack+0x0/0x1c) from [] (ubifs_leb_read+0x84/0x8c) [ 19.457290] [] (ubifs_leb_read+0x0/0x8c) from [] (fallible_read_node+0x80/0x288) [ 19.466820] r7:c7097d00 r6:c7097c70 r5:c05df508 r4:c701c000 [ 19.472760] [] (fallible_read_node+0x0/0x288) from [] (ubifs_tnc_locate+0x100/0x1a8) [ 19.482663] [] (ubifs_tnc_locate+0x0/0x1a8) from [] (do_readpage+0x178/0x50c) [ 19.491936] [] (do_readpage+0x0/0x50c) from [] (ubifs_readpage+0x48/0x498) [ 19.500927] [] (ubifs_readpage+0x0/0x498) from [] (filemap_fault+0x288/0x420) [ 19.510208] [] (filemap_fault+0x0/0x420) from [] (__do_fault+0x74/0x46c) [ 19.519025] [] (__do_fault+0x0/0x46c) from [] (handle_pte_fault+0x80/0x614) [ 19.528111] [] (handle_pte_fault+0x0/0x614) from [] (handle_mm_fault+0x94/0xc0) [ 19.537564] [] (handle_mm_fault+0x0/0xc0) from [] (do_page_fault+0x17c/0x1f0) [ 19.546832] [] (do_page_fault+0x0/0x1f0) from [] (do_DataAbort+0x3c/0xa0) [ 19.555747] [] (do_DataAbort+0x0/0xa0) from [] (__dabt_usr+0x38/0x40) [ 19.564282] Exception stack(0xc7097fb0 to 0xc7097ff8) [ 19.569548] 7fa0: 00139598 00000025 be9cfd14 00139594 [ 19.578094] 7fc0: 4038b000 25252525 4006e6f4 00139598 be9cfd14 fbad2084 be9cfd14 be9cfcfc [ 19.586634] 7fe0: 000e2c28 be9cf78c 4029ee8c 402da6d0 60000010 ffffffff [ 19.593535] r8:be9cfd14 r7:00139598 r6:ffffffff r5:60000010 r4:402da6d0 [ 19.600547] UBIFS error (pid 647): try_read_node: cannot read node type 1 from LEB 218:32880, error -74 [ 19.618229] UBI error: ubi_io_read: error -74 (ECC error) while reading 2156 bytes from PEB 127:36976, read 2156 bytes Sending SIGKILL to all processes Requesting system reboot [ 23.626862] musb-hdrc musb-hdrc.1: remove, state 1 [ 23.631925] usb usb1: USB disconnect, device number 1 [ 23.637190] usb 1-1: USB disconnect, device number 2 [ 23.644586] musb-hdrc musb-hdrc.1: USB bus 1 deregistered [ 23.650584] Restarting system. U-Boot SPL 2013.01.01-svn30622 (Jun 01 2017 - 12:13:09) config ddr_pll_config()++ config ddr_pll_config()-- nand_init+++++ nand_init----- Lcd_Init()++ SetUpLCD()++ SetUpLCD()-- len=307252, height=240, width=320 Logo from nandflash: base=0x81000000; end=0x8104b01f; end-base=0x4b01f; rwsize=0x4b020; r=0x0 Lcd_Init()-- U-Boot 2013.01.01-svn30622 (Jun 01 2017 - 12:13:09) I2C: ready DRAM: 128 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment set_default_env::8581 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: not set. Validating first E-fuse MAC PHY reset timed out cpsw Hit any key to stop autoboot mmc_send_cmd : timeout: No status update Card did not respond to voltage select! (Re)start USB... USB0: scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Download Linux from USB to Nandflash... reading ro_uImage ** Unable to read file ro_uImage ** reading rootfs.img ** Unable to read file rootfs.img ** reading firmdata0.img ** Unable to read file firmdata0.img ** reading datafs.img ** Unable to read file datafs.img ** reading logo.bmp ** Unable to read file logo.bmp ** Booting from nand ... NAND read: device 0 offset 0x3080000, size 0x300000 3145728 bytes read: OK ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-3.2.0-svn2240 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2875408 Bytes = 2.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Linux version 3.2.0-svn2240 (ding@ding-desktop) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #10 Thu May 25 16:25:00 ULAST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: am335xevm [ 0.000000] Ignoring tag cmdline (using the default kernel command line) [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=ubi0:rootfs rw ubi.mtd=7,2048 rootfstype=ubifs rootwait=1t ip=none [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 123724k/123724k available, 7348k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc050d000 (5140 kB) [ 0.000000] .init : 0xc050d000 - 0xc0544000 ( 220 kB) [ 0.000000] .data : 0xc0544000 - 0xc05e7140 ( 653 kB) [ 0.000000] .bss : 0xc05e7164 - 0xc0609be4 ( 139 kB) [ 0.000000] NR_IRQS:396 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER2 at 25000000 Hz [ 0.000000] omap_dm_timer_switch_src: Switching to HW default clocksource(sys_clkin_ck) for timer1, this may impact timekeeping in low power state [ 0.000000] OMAP clocksource: GPTIMER1 at 25000000 Hz [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000181] Calibrating delay loop... 718.02 BogoMIPS (lpj=3590144) [ 0.057199] pid_max: default: 32768 minimum: 301 [ 0.057319] Security Framework initialized [ 0.057418] Mount-cache hash table entries: 512 [ 0.057783] CPU: Testing write buffer coherency: ok [ 0.077326] omap_hwmod: gfx: failed to hardreset [ 0.093366] omap_hwmod: pruss: failed to hardreset [ 0.094448] print_constraints: dummy: [ 0.094802] NET: Registered protocol family 16 [ 0.096891] OMAP GPIO hardware version 0.1 [ 0.099318] am335x_evm_init()------------ddr [ 0.099544] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.101616] am335x_evm_i2c_init()++ [ 0.101827] omap_i2c.1: alias fck already exists [ 0.102034] am335x_evm_i2c_init()-- [ 0.102773] omap2_mcspi.1: alias fck already exists [ 0.102981] omap2_mcspi.2: alias fck already exists [ 0.103233] edma.0: alias fck already exists [ 0.103254] edma.0: alias fck already exists [ 0.103273] edma.0: alias fck already exists [ 0.124516] bio: create slab at 0 [ 0.126523] SCSI subsystem initialized [ 0.128269] usbcore: registered new interface driver usbfs [ 0.128570] usbcore: registered new interface driver hub [ 0.128775] usbcore: registered new device driver usb [ 0.128923] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3 [ 0.129186] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1 [ 0.147266] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz [ 0.149130] tps65910 1-002d: JTAGREVNUM 0x0 [ 0.151504] print_constraints: VRTC: [ 0.152953] print_constraints: VIO: at 1500 mV [ 0.155243] print_constraints: VDD1: 600 <--> 1500 mV at 1262 mV normal [ 0.157537] print_constraints: VDD2: 600 <--> 1500 mV at 1137 mV normal [ 0.158538] print_constraints: VDD3: 5000 mV [ 0.159954] print_constraints: VDIG1: at 1800 mV [ 0.161370] print_constraints: VDIG2: at 1800 mV [ 0.162780] print_constraints: VPLL: at 1800 mV [ 0.164195] print_constraints: VDAC: at 1800 mV [ 0.165605] print_constraints: VAUX1: at 1800 mV [ 0.167023] print_constraints: VAUX2: at 3300 mV [ 0.168465] print_constraints: VAUX33: at 3300 mV [ 0.169874] print_constraints: VMMC: at 3300 mV [ 0.170364] tps65910 1-002d: No interrupt support, no core IRQ [ 0.171804] Switching to clocksource gp timer [ 0.187273] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.187440] musb-hdrc musb-hdrc.0: dma type: pio [ 0.188320] musb-hdrc musb-hdrc.0: USB OTG mode controller at c881c000 using PIO, IRQ 18 [ 0.188473] musb-hdrc musb-hdrc.1: dma type: pio [ 0.188873] musb-hdrc musb-hdrc.1: MUSB HDRC host driver [ 0.188943] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 [ 0.189073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.189089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.189103] usb usb1: Product: MUSB HDRC host driver [ 0.189114] usb usb1: Manufacturer: Linux 3.2.0-svn2240 musb-hcd [ 0.189125] usb usb1: SerialNumber: musb-hdrc.1 [ 0.189873] hub 1-0:1.0: USB hub found [ 0.189904] hub 1-0:1.0: 1 port detected [ 0.190413] musb-hdrc musb-hdrc.1: USB Host mode controller at c881e800 using PIO, IRQ 19 [ 0.190827] NET: Registered protocol family 2 [ 0.191018] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.191308] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.191396] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.191452] TCP: Hash tables configured (established 4096 bind 4096) [ 0.191464] TCP reno registered [ 0.191477] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.191502] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.191686] NET: Registered protocol family 1 [ 0.192017] RPC: Registered named UNIX socket transport module. [ 0.192031] RPC: Registered udp transport module. [ 0.192040] RPC: Registered tcp transport module. [ 0.192049] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.192296] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.199478] VFS: Disk quotas dquot_6.5.2 [ 0.199549] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.200030] msgmni has been set to 241 [ 0.200741] io scheduler noop registered [ 0.200755] io scheduler deadline registered [ 0.200811] io scheduler cfq registered (default) [ 0.201430] ti_cali_init()++ [ 0.201440] ti_cali_init()-- [ 0.201682] fpga_update_start_init()++ [ 0.202012] gpio_value = 0fpga_update_start_init()-- [ 0.202829] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0 [ 0.850400] console [ttyO0] enabled [ 0.854678] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1 [ 0.862504] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2 [ 0.870249] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3 [ 0.878038] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4 [ 0.885800] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5 [ 0.903182] brd: module loaded [ 0.911183] loop: module loaded [ 0.914586] at24 1-0051: 32768 byte 24c256 EEPROM, writable, 64 bytes/write [ 1.001851] No daughter card found [ 1.005446] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write [ 1.012719] am335x_evm_setup()++ [ 1.071855] AM335X: EVM Config read fail: -110 [ 1.076486] No board detected, using GPBoard 1.1A as default [ 1.082451] usb 1-1: new high-speed USB device number 2 using musb-hdrc [ 1.089396] The board is general purpose EVM in profile 0 [ 1.095057] Found invalid GP EVM revision, falling back to Rev1.1A [ 1.101697] _omap_mux_get_by_name: Could not find signal leds-gpio [ 1.108638] voltage_overload_protect_init()+++++++++++++++voltage_overload_protect_init()---------------------- [ 1.119437] da8xx_lcdc.0: alias fck already exists [ 1.125456] caliadc_probe()++ [ 1.128909] ts_dev->cali_base = f9e0d000 [ 1.133086] cali_idle_config()++ [ 1.136447] cali_idle_config()-- [ 1.139804] cali_step_config()++ [ 1.143174] STEPCONFIG1 = 0 [ 1.146079] cali_step_config()-- [ 1.149478] caliadc_probe()-- [ 1.152727] evm_nand_init()++ [ 1.155945] omap_nand_init()++ [ 1.159121] omap_nand_init()-- [ 1.162781] omap-gpmc omap-gpmc: GPMC revision 6.0 [ 1.167784] Registering NAND on CS0 [ 1.172030] evm_nand_init()-- [ 1.175282] _omap_mux_get_by_name: Could not find signal mcasp1_aclkx.mmc0_sdwp [ 1.183988] haptics_init()++ [ 1.187961] haptics_init()-- [ 1.191412] am335x_evm_setup()-- [ 1.196280] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.203547] omap2-nand driver initializing [ 1.208132] ONFI flash detected [ 1.211537] ONFI param page 0 valid [ 1.215210] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP) [ 1.223882] Creating 12 MTD partitions on "omap2-nand.0": [ 1.229538] 0x000000000000-0x000000020000 : "SPL" [ 1.235948] 0x000000020000-0x000000040000 : "SPL.backup1" [ 1.242943] 0x000000040000-0x000000060000 : "SPL.backup2" [ 1.249851] 0x000000060000-0x000000080000 : "SPL.backup3" [ 1.257015] 0x000000080000-0x000000260000 : "U-Boot" [ 1.264376] 0x000000260000-0x000000280000 : "U-Boot Env" [ 1.271293] 0x000000280000-0x000000580000 : "Manufacturedata" [ 1.279689] usb 1-1: New USB device found, idVendor=090c, idProduct=1000 [ 1.286712] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.294161] usb 1-1: Product: Flash Voyager [ 1.298517] usb 1-1: Manufacturer: Corsair [ 1.302794] usb 1-1: SerialNumber: A300000000026580 [ 1.308451] 0x000000580000-0x000003080000 : "rootfs" [ 1.333188] 0x000003080000-0x000003680000 : "kerneldata" [ 1.343207] 0x000003680000-0x000006880000 : "firmdata0" [ 1.370698] 0x000006880000-0x000009a80000 : "firmdata1" [ 1.398127] 0x000009a80000-0x000010000000 : "datafs" [ 1.446741] OneNAND driver initializing [ 1.451411] UBI: attaching mtd7 to ubi0 [ 1.455459] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 1.462001] UBI: logical eraseblock size: 126976 bytes [ 1.467623] UBI: smallest flash I/O unit: 2048 [ 1.472531] UBI: sub-page size: 512 [ 1.477339] UBI: VID header offset: 2048 (aligned 2048) [ 1.483605] UBI: data offset: 4096 [ 1.492017] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 0:2048, read 512 bytes [ 1.507262] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 2:2048, read 512 bytes [ 1.521285] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 3:2048, read 512 bytes [ 1.535308] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 4:2048, read 512 bytes [ 1.549329] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 5:2048, read 512 bytes [ 1.563350] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 6:2048, read 512 bytes [ 1.577367] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 7:2048, read 512 bytes [ 1.591386] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 8:2048, read 512 bytes [ 1.605405] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 9:2048, read 512 bytes [ 1.620619] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 11:2048, read 512 bytes [ 1.634728] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 12:2048, read 512 bytes [ 1.651219] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 15:2048, read 512 bytes [ 1.667715] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 18:2048, read 512 bytes [ 1.686602] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 23:2048, read 512 bytes [ 1.718582] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 39:2048, read 512 bytes [ 1.737471] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 44:2048, read 512 bytes [ 1.762309] UBI(ECC error) while reading 512 bytes from PEB 74:2048, read 512 bytes [ 1.903587] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 75:2048, read 512 bytes [ 1.917694] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 76:2048, read 512 bytes [ 1.931804] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 77:2048, read 512 bytes [ 1.953063] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 84:2048, read 512 bytes [ 1.967172] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 85:2048, read 512 bytes [ 1.988430] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 92:2048, read 512 bytes [ 2.002558] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 93:2048, read 512 bytes [ 2.016671] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 94:2048, read 512 bytes [ 2.030780] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 95:2048, read 512 bytes [ 2.044890] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 96:2048, read 512 bytes [ 2.058998] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 97:2048, read 512 bytes [ 2.073107] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 98:2048, read 512 bytes [ 2.087216] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 99:2048, read 512 bytes [ 2.101324] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 100:2048, read 512 bytes [ 2.115525] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 101:2048, read 512 bytes [ 2.129726] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 102:2048, read 512 bytes [ 2.143928] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 103:2048, read 512 bytes [ 2.158126] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 104:2048, read 512 bytes [ 2.172336] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 105:2048, read 512 bytes [ 2.187713] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 107:2048, read 512 bytes [ 2.201924] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 108:2048, read 512 bytes [ 2.216127] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 109:2048, read 512 bytes [ 2.230328] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 110:2048, read 512 bytes [ 2.244533] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 111:2048, read 512 bytes [ 2.258731] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 112:2048, read 512 bytes [ 2.272935] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 113:2048, read 512 bytes [ 2.287135] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 114:2048, read 512 bytes [ 2.301333] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 115:2048, read 512 bytes [ 2.315533] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 116:2048, read 512 bytes [ 2.329733] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 117:2048, read 512 bytes [ 2.343936] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 118:2048, read 512 bytes [ 2.358135] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 119:2048, read 512 bytes [ 2.372340] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 120:2048, read 512 bytes [ 2.386539] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 121:2048, read 512 bytes [ 2.400740] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 122:2048, read 512 bytes [ 2.414939] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 123:2048, read 512 bytes [ 2.431519] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 126:2048, read 512 bytes [ 2.445718] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 127:2048, read 512 bytes [ 2.459919] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 128:2048, read 512 bytes [ 2.474122] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 129:2048, read 512 bytes [ 2.488322] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 130:2048, read 512 bytes [ 2.502524] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 131:2048, read 512 bytes [ 2.516723] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 132:2048, read 512 bytes [ 2.530924] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 133:2048, read 512 bytes [ 2.545135] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 134:2048, read 512 bytes [ 2.559335] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 135:2048, read 512 bytes [ 2.573547] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 136:2048, read 512 bytes [ 2.587749] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 137:2048, read 512 bytes [ 2.601956] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 138:2048, read 512 bytes [ 2.616154] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 139:2048, read 512 bytes [ 2.630354] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 140:2048, read 512 bytes [ 2.645749] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 142:2048, read 512 bytes [ 2.661141] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 144:2048, read 512 bytes [ 2.675341] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 145:2048, read 512 bytes [ 2.869425] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 297:2048, read 512 bytes [ 2.883628] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 298:2048, read 512 bytes [ 2.897828] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 299:2048, read 512 bytes [ 2.912028] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 300:2048, read 512 bytes [ 2.926228] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 301:2048, read 512 bytes [ 2.940428] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 302:2048, read 512 bytes [ 2.954627] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 303:2048, read 512 bytes [ 2.968826] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 304:2048, read 512 bytes [ 2.983028] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 305:2048, read 512 bytes [ 2.997227] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 306:2048, read 512 bytes [ 3.011426] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 307:2048, read 512 bytes [ 3.025626] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 308:2048, read 512 bytes [ 3.039826] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 309:2048, read 512 bytes [ 3.054170] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 310:2048, read 512 bytes [ 3.068378] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 311:2048, read 512 bytes [ 3.082580] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 312:2048, read 512 bytes [ 3.096779] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 313:2048, read 512 bytes [ 3.110979] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 314:2048, read 512 bytes [ 3.125180] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 315:2048, read 512 bytes [ 3.139378] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 316:2048, read 512 bytes [ 3.153581] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 317:2048, read 512 bytes [ 3.167782] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 318:2048, read 512 bytes [ 3.181982] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 319:2048, read 512 bytes [ 3.196182] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 320:2048, read 512 bytes [ 3.210381] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 321:2048, read 512 bytes [ 3.224581] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 322:2048, read 512 bytes [ 3.238781] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 323:2048, read 512 bytes [ 3.252982] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 324:2048, read 512 bytes [ 3.267182] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 325:2048, read 512 bytes [ 3.281382] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 326:2048, read 512 bytes [ 3.295581] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 327:2048, read 512 bytes [ 3.309781] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 328:2048, read 512 bytes [ 3.323981] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 329:2048, read 512 bytes [ 3.338180] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 330:2048, read 512 bytes [ 3.352381] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 331:2048, read 512 bytes [ 3.366579] UBI error: ubi_io_read: error -74 (ECC error) while r[ 4.712392] UBI error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 298:4096, read 126976 bytes [ 4.723837] UBI warning: ubi_eba_copy_leb: error -74 while reading data from PEB 298 [ 4.809071] UBI error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 299:2048, read 512 bytes [ 4.915967] UBI error: ubi_io_read: error -74 (ECC error) while reading 126976 bytes from PEB 286:4096, read 126976 bytes [ 4.934628] scsi 0:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS [ 4.948469] sd 0:0:0:0: [sda] 7864320 512-byte logical blocks: (4.02 GB/3.75 GiB) [ 4.957325] sd 0:0:0:0: [sda] Write Protect is off [ 4.963322] sd 0:0:0:0: [sda] No Caching mode page present [ 4.969050] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.980231] sd 0:0:0:0: [sda] No Caching mode page present [ 4.985985] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.039808] UBI error: ubi_io_read: error -74 (ECC error) while reading 168 bytes from PEB 128:90784, read 168 bytes [ 5.051026] UBIFS: recovery needed [ 5.056811] sda: [ 5.063442] sd 0:0:0:0: [sda] No Caching mode page present [ 5.069172] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.075549] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.139024] UBI error: ubi_io_read: error -74 (ECC error) while reading 11 bytes from PEB 145:4096, read 11 bytes [ 5.149746] UBIFS error (pid 1): ubifs_leb_read: reading 11 bytes from LEB 9:0 failed, error -74 [ 5.158916] Backtrace: [ 5.161499] [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) [ 5.170310] r6:00000009 r5:0000000b r4:ffffffb6 r3:c0565408 [ 5.176269] [] (dump_stack+0x0/0x1c) from [] (ubifs_leb_read+0x84/0x8c) [ 5.185000] [] (ubifs_leb_read+0x0/0x8c) from [] (ubifs_lpt_init+0x140/0x724) [ 5.194259] r7:c7bb6894 r6:00000000 r5:00000001 r4:c7bb6000 [ 5.200185] [] (ubifs_lpt_init+0x0/0x724) from [] (ubifs_mount+0x1004/0x1dc8) [ 5.209459] [] (ubifs_mount+0x0/0x1dc8) from [] (mount_fs+0x4c/0x188) [ 5.218014] [] (mount_fs+0x0/0x188) from [] (vfs_kern_mount+0x54/0x94) [ 5.226650] [] (vfs_kern_mount+0x0/0x94) from [] (do_kern_mount+0x3c/0xd8) [ 5.235637] r8:00008000 r7:c7a6f540 r6:00000000 r5:c7a6f580 r4:c0575f34 [ 5.242466] r3:00000000 [ 5.245208] [] (do_kern_mount+0x0/0xd8) from [] (do_mount+0x168/0x6d8) [ 5.253835] r8:00000020 r7:c7a6f580 r6:c7a6f540 r5:00000000 r4:00008000 [ 5.260657] r3:00000000 [ 5.263410] [] (do_mount+0x0/0x6d8) from [] (sys_mount+0x8c/0xcc) [ 5.271591] [] (sys_mount+0x0/0xcc) from [] (do_mount_root+0x30/0xbc) [ 5.280123] r7:00008000 r6:c7923000 r5:c05380a4 r4:c7923000 [ 5.286060] [] (do_mount_root+0x0/0xbc) from [] (mount_block_root+0xfc/0x228) [ 5.295322] r6:c7923000 r5:c05380a4 r4:c7923000 [ 5.300154] [] (mount_block_root+0x0/0x228) from [] (prepare_namespace+0xac/0x1d4) [ 5.309876] [] (prepare_namespace+0x0/0x1d4) from [] (kernel_init+0x124/0x130) [ 5.319225] r5:c05436c8 r4:c05436c8 [ 5.322982] [] (kernel_init+0x0/0x130) from [] (do_exit+0x0/0x67c) [ 5.331234] r5:c050d7e8 r4:00000000 [ 5.336155] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0) [ 5.343542] Please append a correct "root=" boot option; here are the available partitions: [ 5.352299] 1f00 128 mtdblock0 (driver?) [ 5.357570] 1f01 128 mtdblock1 (driver?) [ 5.362852] 1f02 128 mtdblock2 (driver?) [ 5.368126] 1f03 128 mtdblock3 (driver?) [ 5.373426] 1f04 1920 mtdblock4 (driver?) [ 5.378699] 1f05 128 mtdblock5 (driver?) [ 5.383982] 1f06 3072 mtdblock6 (driver?) [ 5.389254] 1f07 44032 mtdblock7 (driver?) [ 5.394535] 1f08 6144 mtdblock8 (driver?) [ 5.399806] 1f09 51200 mtdblock9 (driver?) [ 5.405087] 1f0a 51200 mtdblock10 (driver?) [ 5.410447] 1f0b 103936 mtdblock11 (driver?) [ 5.415824] 0800 3932160 sda driver: sd [ 5.420640] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 5.429264] Backtrace: [ 5.431833] [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) [ 5.440640] r6:c7923000 r5:c05380a4 r4:c05e8148 r3:c0565408 [ 5.446575] [] (dump_stack+0x0/0x1c) from [] (panic+0x6c/0x1a0) [ 5.454582] [] (panic+0x0/0x1a0) from [] (mount_block_root+0x184/0x228) [ 5.463299] r3:c0565408 r2:00000000 r1:c781df78 r0:c047cf70 [ 5.469213] r7:00008000 [ 5.471874] [] (mount_block_root+0x0/0x228) from [] (prepare_namespace+0xac/0x1d4) [ 5.481582] [] (prepare_namespace+0x0/0x1d4) from [] (kernel_init+0x124/0x130) [ 5.490930] r5:c05436c8 r4:c05436c8 [ 5.494693] [] (kernel_init+0x0/0x130) from [] (do_exit+0x0/0x67c) [ 5.502954] r5:c050d7e8 r4:00000000