/* 
 * File:   newmain.c
 * Author: ilya
 *
 * Created on 10 августа 2021 г., 17:45
 */

#include <xc.h>
#define _XTAL_FREQ 4000000

#include <stdio.h>
#include <stdlib.h>
#include <pic16f887.h>

// CONFIG1
//#pragma config FOSC = HS        // Oscillator Selection bits (HS oscillator: High-speed crystal/resonator on RA6/OSC2/CLKOUT and RA7/OSC1/CLKIN)
#pragma config FOSC = INTRC_NOCLKOUT// Oscillator Selection bits (INTOSCIO oscillator: I/O function on RA6/OSC2/CLKOUT pin, I/O function on RA7/OSC1/CLKIN)
#pragma config WDTE = OFF        // Watchdog Timer Enable bit (WDT enabled)
//#pragma config PWRTE = ON      // Power-up Timer Enable bit (PWRT disabled)
#pragma config PWRTE = OFF      // Power-up Timer Enable bit (PWRT disabled)
#pragma config MCLRE = ON       // RE3/MCLR pin function select bit (RE3/MCLR pin function is MCLR)
#pragma config CP = OFF         // Code Protection bit (Program memory code protection is disabled)
#pragma config CPD = OFF        // Data Code Protection bit (Data memory code protection is disabled)
#pragma config BOREN = ON       // Brown Out Reset Selection bits (BOR enabled)
#pragma config IESO = ON        // Internal External Switchover bit (Internal/External Switchover mode is enabled)
#pragma config FCMEN = ON       // Fail-Safe Clock Monitor Enabled bit (Fail-Safe Clock Monitor is enabled)
//#pragma config LVP = ON         // Low Voltage Programming Enable bit (RB3/PGM pin has PGM function, low voltage programming enabled)
#pragma config LVP = OFF         // Low Voltage Programming Enable bit (RB3/PGM pin has PGM function, low voltage programming enabled)
//#pragma config DEBUG = OFF         // Low Voltage Programming Enable bit (RB3/PGM pin has PGM function, low voltage programming enabled)

// CONFIG2
#pragma config BOR4V = BOR40V   // Brown-out Reset Selection bit (Brown-out Reset set to 4.0V)
#pragma config WRT = OFF        // Flash Program Memory Self Write Enable bits (Write protection off)

// #pragma config statements should precede project file includes.
// Use project enums instead of #define for ON and OFF.

/*
 * 
 */
int main(int argc, char** argv) {


    TRISA = 0x0; // output

    while (1) {
        PORTA = 0xFF;
        __delay_ms(500);
//        PORTB = 0x00;
        __delay_ms(500);
      
        
    }
 
    return (EXIT_SUCCESS);
}