===========================================Miner log=========================================== 1970-01-01 00:00:12 Open miner sn file /config/sn error 1970-01-01 00:00:12 Miner compile time: Tue Feb 20 13:08:06 CST 2024 type: Antminer S19k Pro sn : 1970-01-01 00:00:13 This is fix-freq version 1970-01-01 00:00:13 Miner compile time: Tue Feb 20 13:08:06 CST 2024 type: Antminer S19k Pro 1970-01-01 00:00:13 commit version: e676fcaf 2023-11-18 17:15:18, build by: jenkins 2024-02-20 13:26:43 1970-01-01 00:00:13 opt_multi_version = 1 1970-01-01 00:00:13 opt_bitmain_ab = 1 1970-01-01 00:00:13 mid_auto_gen = 1 1970-01-01 00:00:13 opt_bitmain_work_mode = 0 1970-01-01 00:00:13 port 427 already exported 1970-01-01 00:00:13 port 429 already exported 1970-01-01 00:00:13 port 431 already exported 1970-01-01 00:00:13 port 433 already exported 1970-01-01 00:00:13 no board pluged in socket 432 1970-01-01 00:00:13 port 434 already exported 1970-01-01 00:00:13 port 435 already exported 1970-01-01 00:00:13 port 447 already exported 1970-01-01 00:00:13 port 406 already exported 1970-01-01 00:00:13 Note: front fan is power on! 1970-01-01 00:00:13 Note: rear fan is power on! 1970-01-01 00:00:13 start the http log. 1970-01-01 00:00:13 httpListenThread start ret=0 1970-01-01 00:00:13 load machine BHB56902 conf 1970-01-01 00:00:13 start listen on 6060 ... 1970-01-01 00:00:13 machine : BHB56902 1970-01-01 00:00:13 get test_loop_securely_find_asic_num failed 1970-01-01 00:00:13 get high_temp_sub_freq failed,set default high_temp_sub_freq = 10 1970-01-01 00:00:13 get mix boardname[0][BHB56902], name:BHB56902 1970-01-01 00:00:18 power off 2024-03-31 10:47:05 ==========================capability start========================== 2024-03-31 10:47:05 board num = 3 2024-03-31 10:47:05 board id = 0, chain num = 1 2024-03-31 10:47:05 chain id = 0 2024-03-31 10:47:05 board id = 1, chain num = 1 2024-03-31 10:47:05 chain id = 1 2024-03-31 10:47:05 board id = 2, chain num = 1 2024-03-31 10:47:05 chain id = 2 2024-03-31 10:47:05 ==========================capability end============================ 2024-03-31 10:47:05 chain num = 3 2024-03-31 10:47:09 load chain 0 eeprom data 2024-03-31 10:47:13 load chain 1 eeprom data 2024-03-31 10:47:17 load chain 2 eeprom data 2024-03-31 10:47:17 eeprom load ret:0 2024-03-31 10:47:17 miner:BHB56901,board_name:BHB56902 2024-03-31 10:47:17 miner:BHB56902,board_name:BHB56902 2024-03-31 10:47:17 create thread get_nonce_and_register_thread 2024-03-31 10:47:17 fixed working voltage = 1360 2024-03-31 10:47:17 Chain [0] PCB Version: 0x0300 2024-03-31 10:47:17 Chain [0] BOM Version: 0x0000 2024-03-31 10:47:17 Chain [1] PCB Version: 0x0300 2024-03-31 10:47:17 Chain [1] BOM Version: 0x0000 2024-03-31 10:47:17 Chain [2] PCB Version: 0x0300 2024-03-31 10:47:17 Chain [2] BOM Version: 0x0000 2024-03-31 10:47:17 Fan check passed. 2024-03-31 10:47:17 init fan pid target=55 2024-03-31 10:47:17 max sensor num = 4 2024-03-31 10:47:17 STATUS_INITED: soc init done! 2024-03-31 10:47:17 temperature_monitor_thread start... 2024-03-31 10:47:20 start to init... 2024-03-31 10:47:21 start up min temp by 75a = 25, limit -25 2024-03-31 10:47:21 i2c_sim_init start 2024-03-31 10:47:21 power i2c device:sim_dev addr:0x10 fd:255 2024-03-31 10:47:21 i2c_sim_init end 2024-03-31 10:47:23 power open power_version = 0x75 2024-03-31 10:47:26 power is Calibrated 2024-03-31 10:47:26 power sn:OLTT324BDJBJG3561 2024-03-31 10:47:26 enable_power_calibration,calibration date:211208. 2024-03-31 10:47:27 power type version: 0x0075 2024-03-31 10:47:29 disable power watchdog: 0x0000 2024-03-31 10:47:30 Initializing the power, please wait, this may take up to 2 minutes... 2024-03-31 10:49:30 Slept 120 seconds, diff = 0. 2024-03-31 10:49:40 set_voltage_by_steps to 1300. 2024-03-31 10:49:42 set_voltage_by_steps to 1500. 2024-03-31 10:49:46 bitmain_get_sample_voltage:0.015876 , but set voltage:1500 2024-03-31 10:49:46 ERROR_POWER_LOST: power voltage abnormity 2024-03-31 10:49:46 fail to open counter file, err:No such file or directory 2024-03-31 10:49:46 stop_mining_and_restart: power voltage abnormity 2024-03-31 10:49:46 uninit_temp_info 2024-03-31 10:49:46 do not read temp anymore... 2024-03-31 10:49:46 cancel thread 2024-03-31 10:49:46 ****power off hashboard**** 2024-03-31 10:49:46 power off 2024-03-31 10:49:47 temp monitor thread exit 2024-03-31 10:49:47 restart 2024-03-31 10:49:47 ****power off hashboard**** 2024-03-31 10:49:47 power off 2024-03-31 10:49:57 Open miner sn file /config/sn error 2024-03-31 10:49:57 Miner compile time: Tue Feb 20 13:08:06 CST 2024 type: Antminer S19k Pro sn : 2024-03-31 10:49:58 This is fix-freq version 2024-03-31 10:49:58 Miner compile time: Tue Feb 20 13:08:06 CST 2024 type: Antminer S19k Pro 2024-03-31 10:49:58 commit version: e676fcaf 2023-11-18 17:15:18, build by: jenkins 2024-02-20 13:26:43 2024-03-31 10:49:58 opt_multi_version = 1 2024-03-31 10:49:58 opt_bitmain_ab = 1 2024-03-31 10:49:58 mid_auto_gen = 1 2024-03-31 10:49:58 opt_bitmain_work_mode = 0 2024-03-31 10:49:58 port 426 already exported 2024-03-31 10:49:58 port 427 already exported 2024-03-31 10:49:58 port 428 already exported 2024-03-31 10:49:58 port 429 already exported 2024-03-31 10:49:58 port 430 already exported 2024-03-31 10:49:58 port 431 already exported 2024-03-31 10:49:58 port 432 already exported 2024-03-31 10:49:58 port 433 already exported 2024-03-31 10:49:58 no board pluged in socket 432 2024-03-31 10:49:58 port 434 already exported 2024-03-31 10:49:58 port 435 already exported 2024-03-31 10:49:58 port 447 already exported 2024-03-31 10:49:58 port 406 already exported 2024-03-31 10:49:58 Note: front fan is power on! 2024-03-31 10:49:58 Note: rear fan is power on! 2024-03-31 10:49:58 start the http log. 2024-03-31 10:49:58 httpListenThread start ret=0 2024-03-31 10:49:58 load machine BHB56902 conf 2024-03-31 10:49:58 start listen on 6060 ... 2024-03-31 10:49:58 machine : BHB56902 2024-03-31 10:49:58 get test_loop_securely_find_asic_num failed 2024-03-31 10:49:58 get high_temp_sub_freq failed,set default high_temp_sub_freq = 10 2024-03-31 10:49:58 get mix boardname[0][BHB56902], name:BHB56902 2024-03-31 10:50:03 power off 2024-03-31 10:50:04 ==========================capability start========================== 2024-03-31 10:50:04 board num = 3 2024-03-31 10:50:04 board id = 0, chain num = 1 2024-03-31 10:50:04 chain id = 0 2024-03-31 10:50:04 board id = 1, chain num = 1 2024-03-31 10:50:04 chain id = 1 2024-03-31 10:50:04 board id = 2, chain num = 1 2024-03-31 10:50:04 chain id = 2 2024-03-31 10:50:04 ==========================capability end============================ 2024-03-31 10:50:04 chain num = 3 2024-03-31 10:50:09 load chain 0 eeprom data 2024-03-31 10:50:13 load chain 1 eeprom data 2024-03-31 10:50:17 load chain 2 eeprom data 2024-03-31 10:50:17 eeprom load ret:0 2024-03-31 10:50:17 miner:BHB56901,board_name:BHB56902 2024-03-31 10:50:17 miner:BHB56902,board_name:BHB56902 2024-03-31 10:50:17 create thread get_nonce_and_register_thread 2024-03-31 10:50:17 fixed working voltage = 1360 2024-03-31 10:50:17 Chain [0] PCB Version: 0x0300 2024-03-31 10:50:17 Chain [0] BOM Version: 0x0000 2024-03-31 10:50:17 Chain [1] PCB Version: 0x0300 2024-03-31 10:50:17 Chain [1] BOM Version: 0x0000 2024-03-31 10:50:17 Chain [2] PCB Version: 0x0300 2024-03-31 10:50:17 Chain [2] BOM Version: 0x0000 2024-03-31 10:50:17 Fan check passed. 2024-03-31 10:50:17 init fan pid target=55 2024-03-31 10:50:17 max sensor num = 4 2024-03-31 10:50:17 STATUS_INITED: soc init done! 2024-03-31 10:50:17 temperature_monitor_thread start... 2024-03-31 10:50:19 start to init... 2024-03-31 10:50:20 start up min temp by 75a = 24, limit -25 2024-03-31 10:50:20 i2c_sim_init start 2024-03-31 10:50:20 power i2c device:sim_dev addr:0x10 fd:255 2024-03-31 10:50:20 i2c_sim_init end 2024-03-31 10:50:22 power open power_version = 0x75 2024-03-31 10:50:24 power is Calibrated 2024-03-31 10:50:24 power sn:OLTT324BDJBJG3561 2024-03-31 10:50:24 enable_power_calibration,calibration date:211208. 2024-03-31 10:50:26 power type version: 0x0075 2024-03-31 10:50:27 disable power watchdog: 0x0000 2024-03-31 10:50:28 Initializing the power, please wait, this may take up to 2 minutes... 2024-03-31 10:52:28 Slept 120 seconds, diff = 1. 2024-03-31 10:52:38 set_voltage_by_steps to 1300. 2024-03-31 10:52:40 set_voltage_by_steps to 1500. 2024-03-31 10:52:45 bitmain_get_sample_voltage:0.015876 , but set voltage:1500 2024-03-31 10:52:45 ERROR_POWER_LOST: power voltage abnormity 2024-03-31 10:52:45 stop_mining_and_restart: power voltage abnormity 2024-03-31 10:52:45 uninit_temp_info 2024-03-31 10:52:45 do not read temp anymore... 2024-03-31 10:52:45 cancel thread 2024-03-31 10:52:45 ****power off hashboard**** 2024-03-31 10:52:45 power off 2024-03-31 10:52:45 temp monitor thread exit 2024-03-31 10:52:46 restart 2024-03-31 10:52:46 ****power off hashboard**** 2024-03-31 10:52:46 power off 2024-03-31 10:52:59 Open miner sn file /config/sn error 2024-03-31 10:52:59 Miner compile time: Tue Feb 20 13:08:06 CST 2024 type: Antminer S19k Pro sn : 2024-03-31 10:53:00 This is fix-freq version 2024-03-31 10:53:00 Miner compile time: Tue Feb 20 13:08:06 CST 2024 type: Antminer S19k Pro 2024-03-31 10:53:00 commit version: e676fcaf 2023-11-18 17:15:18, build by: jenkins 2024-02-20 13:26:43 2024-03-31 10:53:00 opt_multi_version = 1 2024-03-31 10:53:00 opt_bitmain_ab = 1 2024-03-31 10:53:00 mid_auto_gen = 1 2024-03-31 10:53:00 opt_bitmain_work_mode = 0 2024-03-31 10:53:00 port 426 already exported 2024-03-31 10:53:00 port 427 already exported 2024-03-31 10:53:00 port 428 already exported 2024-03-31 10:53:00 port 429 already exported 2024-03-31 10:53:00 port 430 already exported 2024-03-31 10:53:00 port 431 already exported 2024-03-31 10:53:00 port 432 already exported 2024-03-31 10:53:00 port 433 already exported 2024-03-31 10:53:00 no board pluged in socket 432 2024-03-31 10:53:00 port 434 already exported 2024-03-31 10:53:00 port 435 already exported 2024-03-31 10:53:00 port 447 already exported 2024-03-31 10:53:00 port 406 already exported 2024-03-31 10:53:00 Note: front fan is power on! 2024-03-31 10:53:00 Note: rear fan is power on! 2024-03-31 10:53:00 start the http log. 2024-03-31 10:53:00 httpListenThread start ret=0 2024-03-31 10:53:00 load machine BHB56902 conf 2024-03-31 10:53:00 start listen on 6060 ... 2024-03-31 10:53:00 machine : BHB56902 2024-03-31 10:53:00 get test_loop_securely_find_asic_num failed 2024-03-31 10:53:00 get high_temp_sub_freq failed,set default high_temp_sub_freq = 10 2024-03-31 10:53:00 get mix boardname[0][BHB56902], name:BHB56902 2024-03-31 10:53:05 power off 2024-03-31 10:53:06 ==========================capability start========================== 2024-03-31 10:53:06 board num = 3 2024-03-31 10:53:06 board id = 0, chain num = 1 2024-03-31 10:53:06 chain id = 0 2024-03-31 10:53:06 board id = 1, chain num = 1 2024-03-31 10:53:06 chain id = 1 2024-03-31 10:53:06 board id = 2, chain num = 1 2024-03-31 10:53:06 chain id = 2 2024-03-31 10:53:06 ==========================capability end============================ 2024-03-31 10:53:06 chain num = 3 2024-03-31 10:53:10 load chain 0 eeprom data 2024-03-31 10:53:14 load chain 1 eeprom data 2024-03-31 10:53:18 load chain 2 eeprom data 2024-03-31 10:53:18 eeprom load ret:0 2024-03-31 10:53:18 miner:BHB56901,board_name:BHB56902 2024-03-31 10:53:18 miner:BHB56902,board_name:BHB56902 2024-03-31 10:53:18 create thread get_nonce_and_register_thread 2024-03-31 10:53:18 fixed working voltage = 1360 2024-03-31 10:53:18 Chain [0] PCB Version: 0x0300 2024-03-31 10:53:18 Chain [0] BOM Version: 0x0000 2024-03-31 10:53:18 Chain [1] PCB Version: 0x0300 2024-03-31 10:53:18 Chain [1] BOM Version: 0x0000 2024-03-31 10:53:18 Chain [2] PCB Version: 0x0300 2024-03-31 10:53:18 Chain [2] BOM Version: 0x0000 2024-03-31 10:53:18 Fan check passed. 2024-03-31 10:53:18 init fan pid target=55 2024-03-31 10:53:18 max sensor num = 4 2024-03-31 10:53:18 STATUS_INITED: soc init done! 2024-03-31 10:53:18 temperature_monitor_thread start... 2024-03-31 10:53:21 start to init... 2024-03-31 10:53:22 start up min temp by 75a = 24, limit -25 2024-03-31 10:53:22 i2c_sim_init start 2024-03-31 10:53:22 power i2c device:sim_dev addr:0x10 fd:255 2024-03-31 10:53:22 i2c_sim_init end 2024-03-31 10:53:23 power open power_version = 0x75 2024-03-31 10:53:26 power is Calibrated 2024-03-31 10:53:26 power sn:OLTT324BDJBJG3561 2024-03-31 10:53:26 enable_power_calibration,calibration date:211208. 2024-03-31 10:53:27 power type version: 0x0075 2024-03-31 10:53:29 disable power watchdog: 0x0000 2024-03-31 10:53:30 Initializing the power, please wait, this may take up to 2 minutes... 2024-03-31 10:55:30 Slept 120 seconds, diff = 1. 2024-03-31 10:55:40 set_voltage_by_steps to 1300. 2024-03-31 10:55:42 set_voltage_by_steps to 1500. 2024-03-31 10:55:46 bitmain_get_sample_voltage:0.015876 , but set voltage:1500 2024-03-31 10:55:46 ERROR_POWER_LOST: power voltage abnormity 2024-03-31 10:55:46 reach max restart times 2024-03-31 10:55:46 stop_mining: power voltage abnormity 2024-03-31 10:55:46 uninit_temp_info 2024-03-31 10:55:46 do not read temp anymore... 2024-03-31 10:55:46 cancel thread 2024-03-31 10:55:46 ****power off hashboard**** 2024-03-31 10:55:46 power off 2024-03-31 10:55:47 temp monitor thread exit 2024-03-31 10:55:54 Chain[0]: find 0 asic, times 0 2024-03-31 10:55:56 Chain[0]: find 0 asic, times 1 2024-03-31 10:55:58 Chain[0]: find 0 asic, times 2 2024-03-31 10:55:58 Chain 0 only find 0 asic, will power off hash board 0 2024-03-31 10:55:58 ERROR_SOC_INIT: soc init failed! 2024-03-31 10:55:58 stop_mining: soc init failed! 2024-03-31 10:55:58 ****power off hashboard**** 2024-03-31 10:55:58 power off 2024-03-31 10:55:59 Version num 65536 2024-03-31 10:55:59 Mask num 0x1fffe000 2024-03-31 10:55:59 Note: addrInterval or corenum is not initialized.