(00) Manufacturer Access = 0xC000
(01) Remaining Capacity Alarm = 250 mAh
(02) Remaining Time Alarm = 10 min
(03) Battery Mode = 0x00
(04) At Rate = 0 mA
(05) At Rate Time To Full = 65535 min(s)
(06) At Rate Time To Empty = 65535 min(s)
(07) At Rate OK = -1
(08) Temperature = 27 C
(09) Voltage = 12686 mV
(0A) Current = 0 mA
(0B) Average Current = 0 mA
(0C) Max Error = 20 %
(0D) RSOC = 0 %
(0E) ASOC = 0 %
(0F) Remaining Capacity = 0 mAh
(10) Full Charge Capacity = 2500 mAh
(11) Run Time to Empty = 0 min(s)
(12) Average Time to Empty = 0 min(s)
(13) Average Time to Full = 65535 min(s)
(14) Charging Current = 1250 mA
(15) Charging Voltage = 17400 mV
(16) Battery Status = 0x3D0
(17) Cycle Count = 0
(18) Design Capacity = 2500 mAh
(19) Design Voltage = 14800 mV
(1A) Cpecification Info = 0x21
(1B) Manufacture Date = 0x5C4F - 2026.02.15
(1C) Serial Number = 5809
(20) Manufacturer Name = SANYO
(21) Device Name = AL12A32
(22) Device Chemistry = LION
(23) Manufacturer Data = 0x52093D06E60CB80B990C560C
(3C) Battery Cell 4 Voltage = 3302 mV
(3D) Battery Cell 3 Voltage = 3000 mV
(3E) Battery Cell 2 Voltage = 3226 mV
(3F) Battery Cell 1 Voltage = 3158 mV
----------------------------------------------------------------
ERROR: Could not check seal/unseal/FAS
----------------------------------------------------------------