//#include <m8_128.h>

#asm
    .equ __lcd_port=0x15 
    
#endasm
#asm                                                   
                .equ __w1_port=0x15
                .equ __w1_bit=3
#endasm    
#include <1wire.h>
#include <mega16.h>
#include <lcd.h> // LCD driver routines
#include <ds18b20.h>
#include <delay.h>
#include <stdio.h>


char lcd_buffer[33];

/* maximum number of DS18B20 connected to the 1 Wire bus */
#define MAX_DEVICES 8

/* DS18B20 devices ROM code storage area */
unsigned char rom_code[MAX_DEVICES][9];

void main()
{
unsigned char i,j,devices;

lcd_init(16);

/* detect how many DS18B20 devices
   are connected to the 1 Wire bus */
devices=w1_search(0xf0,rom_code);
sprintf(lcd_buffer,"%u DS18B20\nDevice detected",devices);
lcd_puts(lcd_buffer);
delay_ms(2000);

/* display the ROM codes for each device */
if (devices)
   {
   for (i=0;i<devices;i++)
       {
       sprintf(lcd_buffer,"Device #%u ROM\nCode is:",i+1);
       lcd_clear();
       lcd_puts(lcd_buffer);
       delay_ms(2000);
       lcd_clear();
       for (j=0;j<8;j++)
           {
           sprintf(lcd_buffer,"%02X ",rom_code[i][j]);
           lcd_puts(lcd_buffer);
           if (j==3) lcd_gotoxy(0,1);
           };
       delay_ms(5000);
       };
   }
else
while (1); /* stop here if no devices were found */

/* configure each DS18B20 device for 12 bit temperature
   measurement resolution */
for (i=0;i<devices;)
    if (!ds18b20_init(&rom_code[i++][0],20,30,DS18B20_12BIT_RES))
       {
       sprintf(lcd_buffer,"Init error for\ndevice #%u",i);
       lcd_clear();
       lcd_puts(lcd_buffer);
       while (1); /* stop here if init error */
       };

/* measure and display the temperature(s) */       
while (1)
      {
      j=1;
      for (i=0;i<devices;i++)
          {
          sprintf(lcd_buffer,"t%u=%f\xdfC",j++,ds18b20_temperature(&rom_code[i][0]));
          lcd_clear();
          lcd_puts(lcd_buffer);
          delay_ms(500);
          };
      };
}