Форум РадиоКот

Код: Выделить всё

#include "stm32f10x_conf.h"

uint8_t Delay(volatile uint32_t nCount)
{
    for (; nCount != 0; nCount--);
}

int main(void)
{
    GPIO_InitTypeDef Init;

    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);

    Init.GPIO_Pin = GPIO_Pin_13;
    Init.GPIO_Mode = GPIO_Mode_Out_PP;
    Init.GPIO_Speed = GPIO_Speed_50MHz;

    GPIO_Init(GPIOC, &Init);

    while(1)
    {
        if (((GPIOC->ODR ^= GPIO_Pin_13)!=1) && Delay(1000000));
    }
}

Код: Выделить всё

int main(void) {

  if (reset() && (delay(100), 1) && init() && (delay(100), 1) && run_cmd(MOVE_FORWARD)) {
        // do smth
  }
}

Код: Выделить всё

  
void custom_delay(unsigned int delay) {
  while(--delay) __NOP();
}

//...

while (1)  {
   if ((GPIOA->BSRR = GPIO_BSRR_BS_0, 1) && (custom_delay(0x01FFFFFF), 1) && (GPIOA->BSRR = GPIO_BSRR_BR_0, 1) && (custom_delay(0x01FFFFFF), 1));
}

Код: Выделить всё

   \       0x72   0x....             LDR      R6,??DataTable2_3  ;; 0x1ffffff
    101            while (1)  {
    102               if ((GPIOA->BSRR = GPIO_BSRR_BS_0, 1) && (custom_delay(0x01FFFFFF), 1) && (GPIOA->BSRR = GPIO_BSRR_BR_0, 1) && (custom_delay(0x01FFFFFF), 1));
   \                     ??main_0: (+1)
   \       0x74   0x61AC             STR      R4,[R5, #+24]
   \       0x76   0x0030             MOVS     R0,R6
   \       0x78   0x.... 0x....      BL       custom_delay
   \       0x7C   0x0420             LSLS     R0,R4,#+16
   \       0x7E   0x61A8             STR      R0,[R5, #+24]
   \       0x80   0x0030             MOVS     R0,R6
   \       0x82   0x.... 0x....      BL       custom_delay
   \       0x86   0xE7F5             B        ??main_0

Код: Выделить всё

  
void custom_delay(unsigned int delay) {
  while(--delay) __NOP();
}

Код: Выделить всё

     65          void custom_delay(unsigned int delay) {
   \                     custom_delay: (+1)
   \        0x0   0xE000             B        ??custom_delay_0
     66            while(--delay) __NOP();
   \                     ??custom_delay_1: (+1)
   \        0x2   0xBF00             Nop      
   \                     ??custom_delay_0: (+1)
   \        0x4   0x1E40             SUBS     R0,R0,#+1
   \        0x6   0xD1FC             BNE      ??custom_delay_1
     67          }
   \        0x8   0x4770             BX       LR               ;; return