Ошибки target, check the SWIM cable

[Dimann227]

Здравствуйте, приключилась такая беда- использую программатор st link v2, и микроконтролерst link ы stm8f103, раньше всё прошивалось без проблем, а сегодня я случайно в начале подключил вывод swim на плате к выводу swclc программатора. st visual programmer выдаёт ошибку please check sw cable, а st link utility определяет программатор, его id, но выдаёт ошибку can not connect to target!
В настройках target direction fail. Раньше всё работало без проблем. Я спалил программатор?

Добавлено after 3 hours 35 minutes 29 seconds:
******** xxx ********
******************* GDI DUMP => Date : Fri Aug 30 16:02:43 2024

cErrLog::SetLogTraceOn
STLinkUSBDriver.dll loaded
USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00
ST-Link get version failure
ST-Link/V2 device detected
ST-Link/V2 device detected
Target voltage detected: 3.265732
Error getting target IDCODE: if SWD, check SWD connection
Error (4) while initializing ST-Link in SWD mode
ST-Link/V2 device detected
Target voltage detected: 3.264128
Error getting target IDCODE: if SWD, check SWD connection
Error (4) while initializing ST-Link in SWD mode
ST-Link/V2 device detected
Target voltage detected: 3.265732
Error getting target IDCODE: if SWD, check SWD connection
Error (4) while initializing ST-Link in SWD mode
ST-Link/V2 device detected
Target voltage detected: 3.264128
Error getting target IDCODE: if SWD, check SWD connection
Error (4) while initializing ST-Link in SWD mode
USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00
USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00
ST-Link get version failure
USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00
ST-Link get version failure
USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00
ST-Link get version failure
W at 0xe0042004: 0x00000000
**** End of GDI DUMP ****
******************* GDI DUMP => Date : Fri Aug 30 16:02:43 2024

W at 0xe0042004: 0x00000000
**** End of GDI DUMP ****
******************* GDI DUMP => Date : Fri Aug 30 16:02:43 2024

W at 0xe0042004: 0x00000000
**** End of GDI DUMP ****