[uquote="roman.com",url="/forum/viewtopic.php?p=4312382#p4312382"]а там всё просто оказывается))[/uquote]Медиа-контент. Зачем его шифровать ?! По секрету всему свету )))))) Вот пример из библиотеки к шильду -
SFEMP3Shield MP3player. Типа музыкальный сервер. Коль под Ардуину заточен, значит не так уж там и сложно.
Код: Выделить всё
/**
* \file WebPlayer.ino
*
* \brief Example sketch of using the MP3Shield Arduino driver to create a webserver
* \remarks comments are implemented with Doxygen Markdown format
*
* \author Michael P. Flaga
* \author AdaFruit
*
* This sketch is a quick merge of http://github.com/adafruit/SDWebBrowse with
* SFEMP3Shield library demonstrating the VS1053 commanded through a web browser.
*
* \warning
* Need to set the following in the SFEMP3ShieldConfig.h, in order to work.
* \code #define USE_MP3_REFILL_MEANS USE_MP3_Polled \endcode
* as the Ethernet library makes interrupts not possible.
* any one with a fix, let me know.
*/
#include <SdFat.h>
#include <FreeStack.h>
#include <Ethernet.h>
#include <SPI.h>
// Below is not needed if interrupt driven. Safe to remove if not using.
#if defined(USE_MP3_REFILL_MEANS) && USE_MP3_REFILL_MEANS == USE_MP3_Timer1
#include <TimerOne.h>
#elif defined(USE_MP3_REFILL_MEANS) && USE_MP3_REFILL_MEANS == USE_MP3_SimpleTimer
#include <SimpleTimer.h>
#endif
#include <SFEMP3Shield.h>
//create and name the library object
SFEMP3Shield MP3player;
byte result;
/************ ETHERNET STUFF ************/
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
//byte ip[] = { 192, 168, 0, 79 };
byte ip[] = { 172, 17, 67, 192 };
EthernetServer server(80);
/************ SDCARD STUFF ************/
SdFat sd;
SdFile file;
//------------------------------------------------------------------------------
/**
* \brief Setup the Arduino Chip's feature for our use.
*
* After Arduino's kernel has booted initialize basic features for this
* application, such as Serial port and MP3player objects with .begin.
*/
void setup() {
Serial.begin(115200);
Serial.print(F("Free RAM: "));
Serial.println(FreeStack());
// initialize the SD card at SPI_HALF_SPEED to avoid bus errors with
// breadboards. use SPI_FULL_SPEED for better performance.
pinMode(10, OUTPUT); // set the SS pin as an output (necessary!)
digitalWrite(10, HIGH); // but turn off the W5100 chip!
pinMode(8, OUTPUT);
digitalWrite(8, LOW); // put VS1053 into reset
if(!sd.begin(9, SPI_HALF_SPEED)) sd.initErrorHalt();
if (!sd.chdir("/")) sd.errorHalt("sd.chdir");
Serial.print(F("Volume is FAT"));
Serial.println(sd.vol()->fatType(),DEC);
Serial.println();
// list file in root with date and size
Serial.println(F("Files found in root:"));
sd.ls(LS_DATE | LS_SIZE);
Serial.println();
// // Recursive list of all directories
// Serial.println(F("Files found in all dirs:"));
// sd.vwd()->ls(LS_R);
// Serial.println();
Serial.println(F("Done"));
// Debugging complete, we start the server!
Ethernet.begin(mac, ip);
server.begin();
result = MP3player.begin();
//check result, see readme for error codes.
if(result != 0) {
Serial.println(F("Error code: "));
Serial.print(result);
Serial.println(F(" when trying to start MP3 player"));
}
MP3player.setVolume(80,80); // commit new volume Serial.println(FreeRam());
}
//------------------------------------------------------------------------------
/**
* \brief dump list of files to the web
*
* The SdFat does not have an easyway to go down the list of files and get there
* names for direct handeling. Hence this does that.
*/
void ListFiles(EthernetClient client, uint8_t flags) {
// This code is just copied from SdFile.cpp in the SDFat library
// and tweaked to print to the client output in html!
dir_t p;
sd.vwd()->rewind();
client.println(F("<ul>"));
while (sd.vwd()->readDir(&p) > 0) {
// done if past last used entry
if (p.name[0] == DIR_NAME_FREE) break;
// skip deleted entry and entries for . and ..
if (p.name[0] == DIR_NAME_DELETED || p.name[0] == '.') continue;
// only list subdirectories and files
if (!DIR_IS_FILE_OR_SUBDIR(&p)) continue;
// print any indent spaces
client.print(F("<li><a href=\""));
for (uint8_t i = 0; i < 11; i++) {
if (p.name[i] == ' ') continue;
if (i == 8) {
client.print('.');
}
client.print((char)p.name[i]);
}
client.print(F("\">"));
// print file name with possible blank fill
for (uint8_t i = 0; i < 11; i++) {
if (p.name[i] == ' ') continue;
if (i == 8) {
client.print('.');
}
client.print((char)p.name[i]);
}
client.print(F("</a>"));
if (DIR_IS_SUBDIR(&p)) {
client.print('/');
}
// print modify date/time if requested
if (flags & LS_DATE) {
sd.vwd()->printFatDate(p.lastWriteDate);
client.print(' ');
sd.vwd()->printFatTime(p.lastWriteTime);
}
// print size if requested
if (!DIR_IS_SUBDIR(&p) && (flags & LS_SIZE)) {
client.print(' ');
client.print(p.fileSize);
}
client.println(F("</li>"));
}
client.println(F("</ul>"));
}
// How big our line buffer should be. 100 is plenty!
#define BUFSIZ 100
//------------------------------------------------------------------------------
/**
* \brief Main Loop the Arduino Chip
*
* This is called at the end of Arduino kernel's main loop before recycling.
* And is where the user's serial input of bytes are read and analyzed by
* parsed_menu.
*
* Additionally, if the means of refilling is not interrupt based then the
* MP3player object is serviced with the availaible function.
*/
void loop()
{
char clientline[BUFSIZ];
int index = 0;
// Below is only needed if not interrupt driven. Safe to remove if not using.
#if defined(USE_MP3_REFILL_MEANS) \
&& ( (USE_MP3_REFILL_MEANS == USE_MP3_SimpleTimer) \
|| (USE_MP3_REFILL_MEANS == USE_MP3_Polled) )
MP3player.available();
#endif
EthernetClient client = server.available();
if (client) {
// an http request ends with a blank line
boolean current_line_is_blank = true;
// reset the input buffer
index = 0;
while (client.connected()) {
if (client.available()) {
char c = client.read();
// If it isn't a new line, add the character to the buffer
if (c != '\n' && c != '\r') {
clientline[index] = c;
index++;
// are we too big for the buffer? start tossing out data
if (index >= BUFSIZ)
index = BUFSIZ -1;
// continue to read more data!
continue;
}
// got a \n or \r new line, which means the string is done
clientline[index] = 0;
// Print it out for debugging
Serial.println(clientline);
// Look for substring such as a request to get the root file
if (strstr(clientline, "GET / ") != 0) {
// send a standard http response header
client.println(F("HTTP/1.1 200 OK"));
client.println(F("Content-Type: text/html"));
client.println();
// print all the files, use a helper to keep it clean
client.println(F("<h2>Files:</h2>"));
ListFiles(client, LS_SIZE);
} else if (strstr(clientline, "GET /") != 0) {
// this time no space after the /, so a sub-file!
char *filename;
filename = clientline + 5; // look after the "GET /" (5 chars)
// a little trick, look for the " HTTP/1.1" string and
// turn the first character of the substring into a 0 to clear it out.
(strstr(clientline, " HTTP"))[0] = 0;
// print the file we want
Serial.println(filename);
char *get_arg;
get_arg = strstr(filename, "?");
Serial.println(get_arg);
if (get_arg) {
get_arg[0] = 0;
get_arg += 5;
Serial.println(F("get arg invoked "));
Serial.println(get_arg);
Serial.println(filename);
client.println("HTTP/1.1 204 OK");
client.println();
// parse through web page commands
//PLAY
if (strstr(get_arg, "PLAY") != 0) {
result = MP3player.playMP3(filename);
if(result != 0) {
Serial.print(F("Error code: "));
Serial.print(result);
Serial.println(F(" when trying to play track"));
}
// STOP
} else if (strstr(get_arg, "STOP") != 0) {
MP3player.stopTrack();
//PAUSE
} else if (strstr(get_arg, "PAUSE") != 0) {
if( MP3player.getState() == playback) {
MP3player.pauseMusic();
Serial.println(F("Pausing"));
} else if( MP3player.getState() == paused_playback) {
MP3player.resumeMusic();
Serial.println(F("Resuming"));
} else {
Serial.println(F("Not Playing!"));
}
// VOLUME
} else if(strstr(get_arg, "VOLUME") != 0) {
int8_t val = atol(strstr(get_arg, "VAL=") + 4);
Serial.print(F("Val="));
Serial.println(val, DEC);
// push byte[1] into both left and right assuming equal balance.
MP3player.setVolume(val, val); // commit new volume
Serial.print(F("Volume changed to -"));
Serial.print(val>>1, 1);
Serial.println(F("[dB]"));
// PLAY SPEED
} else if(strstr(get_arg, "SPEED") != 0) {
int16_t val = atol(strstr(get_arg, "VAL=") + 4);
Serial.print(F("Val="));
Serial.println(val, DEC);
MP3player.setPlaySpeed(val); // commit new playspeed
Serial.print(F("playspeed to "));
Serial.println(val, DEC);
}
//
} else if ( strstr(strlwr(filename), ".mp3")
|| strstr(strlwr(filename), ".aac")
|| strstr(strlwr(filename), ".wma")
|| strstr(strlwr(filename), ".wav")
|| strstr(strlwr(filename), ".fla")
|| strstr(strlwr(filename), ".mid")
) {
// start of web page
client.println(F("HTTP/1.1 200 OK"));
client.println(F("Content-Type: text/html"));
client.println(F("<html><head></head><body>"));
client.println();
client.print(F("<h2>Playing "));
client.print(filename);
client.println(F("</h2>"));
client.println(F("Press back up to see menu."));
client.println(F("<table>"));
client.println(F("<tr><td>"));
ButtonForm(client, "CMD", "PLAY");
client.println(F("</td><td>"));
// ButtonForm(client, "CMD", "PAUSE");
// client.println(F("</td><td>"));
ButtonForm(client, "CMD", "STOP");
client.println(F("</table>"));
client.println(F("<form method=get>"));
client.println(F("<input type='submit' name='CMD' value='VOLUME'>"));
client.println(F("<input id='VAL' name='VAL' type='range' min='0' max='100' >"));
client.println(F("</form>"));
client.println(F("<form method=get>"));
client.println(F("<input type='submit' name='CMD' value='SPEED'>"));
client.println(F("<input id='VAL' name='VAL' type='range' min='1' max='4' value ='1'>"));
client.println(F("</form>"));
Serial.print(F("Music file:"));
Serial.println(filename);
} else {
if (! file.open(filename, O_READ)) {
client.println(F("HTTP/1.1 404 Not Found"));
client.println(F("Content-Type: text/html"));
client.println();
client.println(F("<h2>File Not Found!</h2>"));
break;
}
Serial.println(F("Opened!"));
client.println(F("HTTP/1.1 200 OK"));
// client.println(F("Content-Type: text/plain"));
client.println(F("Content-Type: "));
Serial.println(F("Content-Type: "));
if (strstr(strlwr(filename), ".htm") != 0) { //Sets content type.
client.println(F("text/html"));
Serial.println(F("text/html"));
} else if (strstr(strlwr(filename), ".css") != 0) {
client.println(F("text/css"));
Serial.println(F("text/css"));
} else if (strstr(strlwr(filename), ".png") != 0) {
client.println(F("image/png"));
Serial.println(F("image/png"));
} else if (strstr(strlwr(filename), ".jpg") != 0) {
client.println(F("image/jpeg"));
Serial.println(F("image/jpeg"));
} else if (strstr(strlwr(filename), ".gif") != 0) {
client.println(F("image/gif"));
Serial.println(F("image/gif"));
} else if (strstr(strlwr(filename), ".3gp") != 0) {
client.println(F("video/mpeg"));
Serial.println(F("video/mpeg"));
} else if (strstr(strlwr(filename), ".pdf") != 0) {
client.println(F("application/pdf"));
Serial.println(F("application/pdf"));
} else if (strstr(strlwr(filename), ".js") != 0) {
client.println(F("application/x-javascript"));
Serial.println(F("application/x-javascript"));
} else if (strstr(strlwr(filename), ".xml") != 0) {
client.println(F("application/xml"));
Serial.println(F("application/xml"));
} else {
client.println(F("text"));
Serial.println(F("text"));
}
client.println();
int16_t c;
while ((c = file.read()) > 0) {
// uncomment the serial to debug (slow!)
Serial.print((char)c);
client.print((char)c);
}
file.close();
}
} else {
// everything else is a 404
client.println(F("HTTP/1.1 404 Not Found"));
client.println(F("Content-Type: text/html"));
client.println();
client.println(F("<h2>File Not Found!</h2>"));
}
break;
}
}
// give the web browser time to receive the data
delay(1000);
client.stop();
}
}
void ButtonForm(EthernetClient client, char* name, char* value) {
client.print("<form method=get>");
// client.print(F("<input type='hidden' name='")); client.print(name); client.print(F("' value='")); client.print(value); client.print(F("'>"));
client.print(F("<input type='submit' name='")); client.print(name); client.print(F("' value='")); client.print(value); client.print(F("'>"));
client.println(F("</form>"));
}
Шифровать Ардуина не шифрует, но шифрованное передает.
[/uquote]Если вы ко мне - то я не собирался. я делал. Работало вполне успешно. См. начало ветки..
